Operator`s manual

1. GENERATOR GROUND CONNECTION LUG: This lug is for connecting a good earthen ground per any local,

state or National Electric Code (NEC) guidelines before starting the generator.

2. GENERATOR OUTPUT CONNECTION LUGS: These lugs allow appropriate loads to be wired directly to the

generator.

3. CONNECTION FOR BATTERY CHARGER (OPTIONAL): This outlet allows for 120VAC input to power onboard

battery charger.

4. MAIN CIRCUIT BREAKER: This breaker will disconnect power to the connection lugs (items 1-2). It WILL NOT

disconnect power to the convenience outlets when the engine is running.

5. AUXILIARY LIGHT SWITCHES: These switches operate optional control panel and interior lights.

6. AIR FILTER METER: This gauge shows the condition of the air filter when the engine is running.

7. MAGNUM DIGITAL CONTROLLER: See page 14 for more information.

8. 20A CIRCUIT BREAKERS: Circuit breakers for the 120V GFCI outlets.

9. 120V GFCI DUPLEX CONVENIENCE OUTLETS: Used for connecting additional loads or equipment to the

generator.

10. 50A CIRCUIT BREAKERS: Circuit breakers for the 120/240V twist-lock outlets.

11. 120/240V TWIST-LOCK CONVENIENCE OUTLETS: Used for connecting additional loads or equipment to the

generator.

12. REMOTE START TERMINAL BLOCK: This terminal block allows the generator to be started from a remote

location with a dry-contact closure switch when the generator is used for standby or remote power.