Operator`s manual

4. Press the green “ENGINE START” button. The Prestart (Preheat) screen will be displayed (if equipped) and a

countdown will begin from 20 seconds to 0.

5. The Starting screen will be displayed. The engine will crank and start running.

6. The Running screen will display.

Note: It may take a few seconds for the engine to run smoothly and reach its governed operating speed. The 45

second “SENSING” time delay will start to count down.

7. The LCD window will then toggle from the Running screen to the Generator Display Screen and then to the

Engine Display Screen.

8. If the engine does not start after the first cranking attempt, the engine will pause for 15 seconds to allow the

starter to cool. The LCD window will show “PAUSE”. The engine will make two more attempts to start for a total

of three crank cycles.