Operator`s manual

7
SAFETY SYMBOL SUMMARY
This equipment has been supplied with numerous safety and operating decals. These decals provide important
operating instructions and warn of dangers and hazards. Replace any missing or hard-to-read decals and use care
when washing or cleaning the unit. Decal placement and part numbers can be found in the parts section or parts
manual included with your unit. Below is a summary of the intended meanings for the symbols used on the decals.
Hot surface(s) nearby.
Fire/explosion hazard; Keep
open flames away from unit.
Read and understand the
supplied operator’s manual
before operating unit.
Remove negative battery
cable before performing
any service on unit.
Stop engine before making
connections.
Use clean diesel fuel only.
Unit electrical ground.
Hearing protection required
while operating unit with doors
open.
Anchor/tie down point.
Lift here only.
Asphyxiation hazard; Operate
in well ventilated area.
Dangerous voltage may be
present.
Never change switch position
while engine is running.
Burn/scald hazard;
pressurized steam.
Fan hazard; Keep body parts
clear of this area.
Isolate generator to prevent
electrocution hazard.
Belt/entanglement hazard; Keep
body parts clear of this area.
Safety alert symbol; Used to
alert you to potential personal
injury hazards.
Stop engine before fueling.
Engine running.