Owner's Manual

Light Control

backlight is dimmed.
Speed Indication
The standard readout is real time speed, and can be switched to show average speed (AVG), and maximum
speed (MAX).
How to change speed readout...
Display
15
4.Display
Trip, Odometer, & Range
Short press the M button to switch from TRIP, ODO, & RANGE on the display. The cycle order is TRIP/AVG,
ODO/MAX, then RANGE/AVG. After 5 seconds with no operation preformed on the M button and the bike
speed greater than 0 the display screen will switch back to the main interface. The symbols below will indi-
cate which value is being shown.
ODO
TRIP
RANGE
Light On Indication Light Off Indication