Owner's Manual

Maintenance Schedule Each Ride Weekly Monthly 6 Months Yearly
Tire Pressure X
Tire Condition X
Visual Inspection X
Brake Lever Pressure X
Quick Releases X
Handlebar Alignment X
Saddle Alignment X
Battery Pack Locked X
Wheel Check X
Inspect Frame Condition¹ X
Clean & Lubricate Chain X
Check Brake Pads X
Lubricate Forks X
Lubricate Brakes & Cables X
Lubricate Folding Mechanism X
Check all Bolts & Torque Settings X
Clean Bicycle X
Charge Battery X
Check Heel Spokes X
Inspect Rim Condition X
Inspect Saddle, Rails & Clamp X
Grease Pedal Bearings X
Check Hub Bearings X
Check Headset Bearings X
Check Bottom Bracket Bearings X
Replace Brake Pads X
Replace Brake Cables² X
Replace Tires² X

As with all mechanical components, electrically power assisted cycles (EPAC) are subjected to wear and high stresses. Different materials and
components may react to wear or stress fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail, possibly
causing injuries to the rider. Any form of crack, scratches or change of coloring in highly stressed areas indicate that the life of the component has
been reached and it should be replaced.
Warning
Recommendations & Maintenance
21