Owner's Manual
5.3 Denition of Tampering and Recommendations
Category 2
Components which can only be replaced after approval from the bicycle manufacturer
Frame Hubmotor Wheel Brake Shoe Bottom Bracket
Fork Brake System Luggage Carrier
Category 3
Components which can only be replaced after approval from the bicycle or component manufacturer
Cranks Wheel without Hub Motor Tires³ Brake System
Chain | Belt¹ Rim Tape Mechanical Brake Cables Handlebar
Seat Post Headlight² Saddle Headlight² Hydraulic Brake Cables Stem
¹at original width
²maximum variation from original should not exceed 20mm
³at orginal ETRTO specifications only
Category 1
Components which can only be replaced after approval from the bicycle manufacturer/ electronic system provider
Motor Controller Electric Cables Battery
Sensors Controls on the Handlebar Display Battery Charger
Category 4
Components which can be replaced without approval
Headset Inner Tubes Shifting Inner & Outer Cables Kickstand
Pedals¹ Chainring Dynamo Grips
Derailleurs Front Light Cassette | Freewheel | Cogs³
Shifters Rear Light Chaincase
Mudguards² Spokes Belt Drive Ring
¹at the same width as the originals
²only the same size as the originals and mounted at least 10 mm distance from the tire
³when the cogs are the same as the originals
Recommendations & Maintenance
22