Owner's Manual

Installation & Adjustment

Step 8. Adjust the Handlebar & Display

Sit on the saddle and rotate the handlebar to your desired position. Then fully tighten the four face-

plate screws to secure it. Loosen the screws on the display mount to adjust the angle. Tighten the

screws to secure the display mount in place. The angle of the display itself can also be adjusted.

Step 9. Install Pedals



before installation. To install the pedals on the crank arms tighten the right pedal clockwise, and left pedal



Step 7. Check Stem

Stand in front of the bike and clamp the front wheel with both legs. Verify the handle bars are straight and perpen-

dicular to the front wheel. Then make sure that the pinch bolts are tight and you can not turn the stem freely from

the front wheel (meaning the stem should not twist separate from the front wheel, they should only twist together).

2. Assembly and Adjustment

2.2 Assembly of the Pedals