User Manual

ManualsBrandsMagnus ManualsPhotographyDeluxe Photo Tripod/Monopod With 3-Way Head

• Never set up or pull down a tripod while a camera is

mounted.

• Do not move the tripod or adjust the legs while a

camera is mounted.

• Do not exceed the maximum weight capacity of the

tripod.

• Never leave a camera unattended on the tripod.

• The camera should be securely fastened to the quick-

release mounting plate before mounting onto the

tripod.

• Never mount a camera to the tripod until all tripod

legs are locked and stabilized.

• Do not stand on, rest on, or hang anything from the

mid-level spreader.

• Do not attempt to remove the mid-level spreader.

• Do not lift or move the tripod by the head.

• Keep hands clear of the inside of the legs to avoid

trapping ﬁngers.

• The safe operation of the tripod is the responsibility

of the user.

ONE (1) YEAR LIMITED WARRANTY

This MAGNUS product is warranted to the original

purchaser to be free from defects in materials and

workmanship under normal consumer use for a period

of one (1) year from the original purchase date or thirty

(30) days after replacement, whichever occurs later.

The warranty provider’s responsibility with respect to

this limited warranty shall be limited solely to repair or

replacement, at the provider’s discretion, of any product

that fails during normal use of this product in its intended

manner and in its intended environment. Inoperability

of the product or part(s) shall be determined by the

warranty provider. If the product has been discontinued,

the warranty provider reserves the right to replace

it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused

by misuse, neglect, accident, alteration, abuse, improper

installation or maintenance. EXCEPT AS PROVIDED

HEREIN, THE WARRANTY PROVIDER MAKES NEITHER

ANY EXPRESS WARRANTIES NOR ANY IMPLIED

WARRANTIES, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. This warranty

provides you with speciﬁc legal rights, and you may

also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Magnus

Customer Service Department to obtain a return

merchandise authorization (“RMA”) number, and return

the defective product to Magnus along with the RMA

number and proof of purchase. Shipment of the defective

product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit

www.MagnusTripods.com or call Customer Service at

212-594-2353.

Product warranty provided by the Gradus Group.

www.Gradusgroup.Com

Magnus is a registered trademark of the gradus group.

Owner’s

Manual

User Cautions

Photo Tripod Components

www.MagnusTripods.com

Thank you for choosing Magnus.

Congratulations on the purchase of your new Magnus

tripod. This tripod features a rapid center column

that detaches to serve as an adjustable four-section

monopod, and telescoping legs with ﬂip-locks for fast

and easy leg adjustments. The three-way pan & tilt

head gives you total control over camera positioning,

and the quick-release plate features a 1/4”-20 male

thread for universal camera mounting. There is also

a bubble level to ensure that your shot is properly

aligned.

Please read and follow these instructions, and keep

this manual in a safe place.

Platform Orientation

Locking Knob

Universal ¼-20

Mounting Screw

Photo Tripod

DX-M

Tilt/Pan Bar /

Tilt Lock

Center Column

Locking Knob

Foam Padding

Center Brace

Locking Collar

Retractable

Spiked Feet

Quick-Release

Mounting Plate

Pan Locking

Knob

Leg

Flip-Lock

Image is for illustration purposes only.

Features vary by model.

MAGNUS

A Gradus Group Brand

GG4

Center column/

monopod

Summary of content (8 pages)

PAGE 1
Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features a rapid center column that detaches to serve as an adjustable four-section monopod, and telescoping legs with flip-locks for fast and easy leg adjustments. The three-way pan & tilt head gives you total control over camera positioning, and the quick-release plate features a 1/4”-20 male thread for universal camera mounting. There is also a bubble level to ensure that your shot is properly aligned.
PAGE 2
Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features a rapid center column that detaches to serve as an adjustable four-section monopod, and telescoping legs with flip-locks for fast and easy leg adjustments. The three-way pan & tilt head gives you total control over camera positioning, and the quick-release plate features a 1/4”-20 male thread for universal camera mounting. There is also a bubble level to ensure that your shot is properly aligned.
PAGE 3
Opening the Tripod 1 Always extend the legs from the top flip-locks first. Pull out on each flip-lock and extend the legs to the desired height. Close each flip-lock. (See Figs. A-B.) Figure A 2 Rotate the locking collar counterclockwise to release the center brace, and gently pull the legs out. Push down on the center brace, and then rotate the locking collar clockwise to lock the legs in place (Fig. C).
PAGE 4
Opening the Tripod 1 Always extend the legs from the top flip-locks first. Pull out on each flip-lock and extend the legs to the desired height. Close each flip-lock. (See Figs. A-B.) Figure A 2 Rotate the locking collar counterclockwise to release the center brace, and gently pull the legs out. Push down on the center brace, and then rotate the locking collar clockwise to lock the legs in place (Fig. C).
PAGE 5
Opening the Tripod 1 Always extend the legs from the top flip-locks first. Pull out on each flip-lock and extend the legs to the desired height. Close each flip-lock. (See Figs. A-B.) Figure A 2 Rotate the locking collar counterclockwise to release the center brace, and gently pull the legs out. Push down on the center brace, and then rotate the locking collar clockwise to lock the legs in place (Fig. C).
PAGE 6
Opening the Tripod 1 Always extend the legs from the top flip-locks first. Pull out on each flip-lock and extend the legs to the desired height. Close each flip-lock. (See Figs. A-B.) Figure A 2 Rotate the locking collar counterclockwise to release the center brace, and gently pull the legs out. Push down on the center brace, and then rotate the locking collar clockwise to lock the legs in place (Fig. C).
PAGE 7
Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features a rapid center column that detaches to serve as an adjustable four-section monopod, and telescoping legs with flip-locks for fast and easy leg adjustments. The three-way pan & tilt head gives you total control over camera positioning, and the quick-release plate features a 1/4”-20 male thread for universal camera mounting. There is also a bubble level to ensure that your shot is properly aligned.
PAGE 8
Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features a rapid center column that detaches to serve as an adjustable four-section monopod, and telescoping legs with flip-locks for fast and easy leg adjustments. The three-way pan & tilt head gives you total control over camera positioning, and the quick-release plate features a 1/4”-20 male thread for universal camera mounting. There is also a bubble level to ensure that your shot is properly aligned.