PG-6 Quick-Start Guide Pistol Grip Ball Head
Using the Quick-Release Plate Before you attach your camera to the pistol grip ball head, make sure the head is secured to the tripod with the 3/8-inch socket. The maximum load capacity is 6.6 pounds (3 kg). 1 Flip the lock out, and remove the quick-release plate. (Fig. A) 2 Attach your camera to the quick-release plate using the 1/4-inch mounting stud and D-ring. 3 4 Figure A Flip the lock out, and insert the attached quick-release plate into the base.
Adjusting the Ball Head Angle 1 Squeeze and hold the trigger release. 2 Tilt your camera to the preferred angle. You can use the 90° notch to change from shooting horizontally to vertically and also rotate the ball joint if needed. (Fig. C) 3 Release the trigger to secure your camera’s position. Figure C You can check the bubble levels to make sure you’re shooting on an even plane.
ONE-YEAR LIMITED WARRANTY This Magnus product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
