Automobile Parts User Manual

146. Install the fuel pressure connector to the
sensor on the fuel rail.
148. Approximately two inches from the
connector, cut ONLY the GREY and GREY with
Red striped wires. These are the Intake Air Tem-
perature (IAT) wires.
147. Locate the Mass Air Flow (MAF) connector
on the harness and peel back the tape and split
loom.
145. Install all eight fuel injector connectors onto
the injectors. Take care not to rotate the injectors
from their 90 degrees from the fuel rail position.
05/06
Page 39
2004-2006 Ford F-150 3V Supercharger Installation Instructions magnacharger.com