User's Manual

7
SECTION 2: SYSTEM REQUIREMENTS & DEVICE
FEATURES
SYSTEM REQUIREMENTS
 Windows XP or later (32-bit or 64-bit)
 Microsoft .NET Framework version 2.0 (Not required but suggested)
 USB port
Upon installation, Windows will automatically recognize and install the USB drivers for this
device.
DEVICE FEATURES
Physical and Electronic Security
The DYNAPRO enclosure and its associated electronics have been designed to form a Tamper
Resistant Security Module (TRSM). The covers are securely attached and incorporate sensing
circuits to detect if any attempt is made to open the unit. Internal spaces within the DYNAPRO
have been minimized to reduce the possibility of unauthorized modifications.
In addition, any attempt to penetrate or modify the DYNAPRO electronically will cause the unit
to permanently erase its stored encryption keys, after which the DYNAPRO will cease to
function.
Sleep Mode
When the Windows operating system shuts down or is suspended the DYNAPRO will enter into
a sleep mode.
Liquid Crystal Display
The Liquid Crystal Display (LCD) is a color graphics display capable of showing static or
animated messages.
Function Buttons (Soft Keys)
The three function buttons or soft keys are located below the LCD screen. These buttons are
programmable for use with display-based prompts.
10-Digit Numeric Pad
During normal operation the numeric keypad is used for PIN entries. An audio tone will provide
feedback when entering the PIN digits. There are three additional keys that may be used during
a transaction: an ENTER button (green), a CLEAR button (yellow), and a CANCEL button
(red).
Magnetic Card Reading
The DYNAPRO contains a MagneSafe card reader that encrypts card data at the point of swipe
to protect the cardholder’s personal information. The reader incorporates MagTek’s 3-track
encrypting IntelliHead, a magnetic read head which has encapsulated and securely potted