Owner's manual

MagTek Device Drivers for Windows
110
MINI MICR CHECK READER & MSR
File Name
MINIMICR
Friendly Name(s)
Mini MICR RS-232 & Mini MICR Wedge
Remarks
These devices may or may not have an MSR installed. If not
installed, the driver may not properly indicate the c_tracks
capability.
Commands Supported
/cancel cmd X /load_key n key
/reset
X
/display [x]
/rawrecv
X /set prop val X
/echo string X /rawsend x X
/ver
X
/event n data
/rawxact x X /write data
/get prop X /read [[x] y] X
Properties Supported
Property Yes Default Property Yes Default Property Yes Default
account_no chk_mod10
X
msg3
amount chk_number
X
msg4
applied_fmt
X
chk_routing
X
offline_enc
c_card_stat chk_status
X
oper_tout
c_cardwpin chk_transit
X
pin_blk_fmt
c_check
X 1
cmd_pending pinfilldig
c_events dblpinentry port_name
X
c_keypress dev_status
X
pwroffdelay
c_keystring dev_version
X
s_down_tout
c_magnetic
X 1
enable_cmc7
X *
track1ss
X
c_mechanics
0
enc_key track2ss
X
c_pin enc_key_sn track3ss
X
c_smart
0
enc_mode trivpinchk
c_tracks
X *
entry_echo trk_enable
X *
c_write
0
entry_len
trk1data
X
c_wr_secure entry_tout
trk2data
X
capitalize
X 1
events_on
trk3data
X
card_stat invalcmdrsp
X 0
visa_mac1
chk_account
X
key_parity visa_mac2
chk_amount
X
lasterr
X
visa_mac3
chk_bankid
X
max_pin_len wr_coer
chk_data
X
msg1 wr_secure
chk_format
X **
msg2 xact_type
* = Depends on setting in the device.
** = Depends on setting in INF file (default = 6500). See "See Section 1, "MICR Format
Numbers" for more information.