Owner's manual

MagTek Device Drivers for Windows
74
If you select Modify then click Next, you will be presented with the same selections you had when you
initially installed the MTD Drivers. At this point, you can either choose to uncheck any existing devices
(effectively removing that driver) or to add new ones.
Modifying a Device Driver’s Settings
If you do not need to add or remove one of the device drivers but wish to modify one of the device’s
configuration parameters, you do not have to go back to the original installation disk.
Modifying Device Settings in Windows 98/ME
To modify the device driver’s settings, perform the following steps:
1. Right-click on My Computer on the desktop or open the Control Panel and double click on the
System icon then select Properties.
2. Select the Device Manager tab.
3. Expand the MagTek class by clicking the plus sign. Find the required device under the MagTek
class then click on Properties.