BulleT Installation and Development Manual for Android Phones Manual Part Number 99875540 Rev 3.02 JUNE 2014 REGISTERED TO ISO 9001:2008 1710 Apollo Court Seal Beach, CA 90740 Phone: (562) 546-6400 FAX: (562) 546-6301 Technical Support: (651) 415-6800 www.magtek.
Copyright© 2001-2011 MagTek®, Inc. Printed in the United States of America Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of MagTek, Inc. MagTek is a registered trademark of MagTek, Inc.
Development LIMITED WARRANTY MagTek warrants that the products sold pursuant to this Agreement will perform in accordance with MagTek’s published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from MagTek (the “Warranty Period”).
FCC WARNING STATEMENT This equipment has been tested and was found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference with radio communications.
Development TABLE OF CONTENTS SECTION 1. CONNECTING READER TO MOBILE DEVICE .................................................................. 7 SECTION 2. QWICKPAY APPLICATION ..................................................................................................... 8 SECTION 3. DEVELOPMENT ...................................................................................................................... 9 TABLES AND FIGURES Figure 1-1. BULLET READER ..........................................
Figure 1-1.
Development SECTION 1. CONNECTING READER TO MOBILE DEVICE 1. 5. Pull up Applications or Menu and select Settings On your Android device select SCAN FOR DEVICES. 2. 6. Select Wireless and network Select the MAGTEK DEVICE when it appears on the screen. 3. 7. Select Bluetooth settings The screen will prompt you for a PIN (the default is 1234). 4.
SECTION 2. QWICKPAY APPLICATION 1. 3. Go to the QwickPAY application Press the ‘Android MENU’ button on your Android device and choose CONNECT. Connect to the desired MAGTEK BLUETOOTH device. 2. 4. The top red bar shows the device is not connected The top green bar shows the device is now connected. The device is now ready to use.
Development SECTION 3. DEVELOPMENT Android comes with a demo with source that is called the BluetoothChat that allows communicating to the Bluetooth Devices. In order to use that demo with the reader, you need to change one line of code in BluetoothChatService.java change the following from private static final UUID MY_UUID = UUID.fromString("fa87c0d0-afac-11de-8a390800200c9a66"); To private static final UUID MY_UUID = UUID.
eg.
Development else { //Handle Error and } Return } private boolean IsCompleteMessage(String lpstrData) { try { if (lpstrData.length() > 0) { if (Character.toString('\r').compareTo( Character.toString(lpstrData .charAt(lpstrData.length() - 1))) == 0) { return true; } } } catch (Exception ex) { } return false; } Add Code to BluetoothChat.