Spec Sheet

SureSwipe MSR

magtek.com

SureSwipe MSR... Two Heads Are Better Than One.

Introducing the Industry’s first stand-alone Magnetic Stripe Reader (MSR) with TWO

Magnetic Heads designed to reduce confusion at the Point of Sale.

Featuring a 3-track bi-directional dual sided magnetic reader, the SureSwipe MSR was

designed specifically to read any magnetic stripe card regardless of which way the magnetic

stripe is facing when swiped. With a 99.9% accuracy rate, the SureSwipe MSR ensures the

card data will be read on the first swipe every time.

The SureSwipe MSR ensures the card data will be read on the

first swipe every time.

Compatible with MagTek’s existing USB MSR readers.

Designed and configured to interface seamlessly with leading

electronic cash registers, POS terminals and other USB devices.

An LED indicator on the top of the reader provides the operator

with continuous status of the reader operations.

Captures 3 tracks of data from all ISO- and AAMVA-encoded

magnetic stripe cards.

Available in standard HID and Keyboard Emulation modes.

PAGE 1
SureSwipe MSR... Two Heads Are Better Than One. Introducing the Industry’s first stand-alone Magnetic Stripe Reader (MSR) with T WO Magnetic Heads designed to reduce confusion at the Point of Sale. Featuring a 3-track bi-directional dual sided magnetic reader, the SureSwipe MSR was designed specifically to read any magnetic stripe card regardless of which way the magnetic stripe is facing when swiped. With a 99.
PAGE 2
Standard Configurations Reference Standards ISO 7810 and ISO 7811/AAMVA Power Input 5V from USB bus Recording Method Two-frequency coherent phase (F2F) Message Format ASCII Card Speed 3 - 60 i.p.s. (7,62 - 152,4 cm/s) Electrical Current Normal: 15 mA Suspend Mode: 200 uA Mechanical Size Length: 3.94 in (100 mm) Width: 1,28 in (32,5 mm) Height: 1.23 in (31,3 mm) Weight 4.