Manual

Configuring IP Addresses
11
Step 6: Select option “Internet Protocol Version 4 (TCP/IPv4)” on the Properties form. Click
Properties button. The following form is displayed:
Step 7 Select option “Use the following IP address”. Enter an IP address that has the same
subnet as the device’s IP address which was entered on the Advanced tab in previous
step. In this example, device’s IP address is 192.168.1.15. Choose an IP address in subnet
192.168.1 that has not been taken. In the form above, 192.168.1.16 is chosen. Enter
Subnet mask address 255.255.255.0. Click OK button to close the form.