Manual
<IntelliCAT>| <Migration to Windows 7> | <User Support Document>
Page 11
Step 14 - Local/Network Setup
If the desktp INTCAT.INI file also includes some Mapped Drives or UNC paths, this means
that the old IntelliCAT Setup is a partial local/network setup
Review the Networked Location of the IntelliCAT install by following the mapped drive or UNC path.
14 A - Locate the old MTAdmin.MDB that is in use
Example of current 1.X setup = \\server1\Magtek\IntelliCAT\MTAdmin.mdb..........
The file will continue to be used during the migration - DO NOT TOUCH this file.
14 B - Locate the old \Operators\MTAdmin.MDB - if present - Example of current 1.X
setup using an Operator folder =
\\server1\MagTek\IntelliCAT\Operators\MtAdmin.mdb..........
The file will continue to be used during the migration - DO NOT TOUCH this file
Important Note: DO NOT TOUCH THE FILES referenced above
Note: The above examples may also point to a mapped drive. The same actions will apply for Step 14
regardless of whether a UNC or mapped drive is being used.
Note: The old 1.XX networked Database(s) will continue to work as the migration takes place, one branch
at a time, AND they will also be used to import the old operators into the new installation with no need to
recreate all of the operator cards currently in use.
Step 15 - Create new folder(s) - Critical Step Must Be Performed for a Network
Installation
Create a new network folder named 2.X_IntelliCAT
On the Network
Create one new folder named 2.X_IntelliCAT if only 14A is present above and then,
If an Operators folder is present create a second folder named 2.X_Operators if 14B is
present.
o If 14B is not present, do not create the second folder.
15 A. Example 1 = new 2.X setup = \\server1\Magtek\2.X_IntelliCAT\.......
15 B. Example 2 = new 2.X setup = \\server1\Magtek\IntelliCAT\2.X_Operators\......
Note: The same instructions apply if the drive is mapped.
Step 16 - Copying the new 2.XX MtAdmin.MDB and IntelliCAT.MDW to new folder(s)
O.S Dependent
If 15A IS TRUE in a 32 bit/64 PC - NAVIGATE to C:\...\MagTek\IntelliCAT\
o LOCATE THE MtAdmin.MDB and IntelliCAT.MDW on the new PC,
o COPY and PASTE both new files to the new 2.X_IntelliCAT NETWORK folder,
i.e. \\server1\Magtek\2.X_IntelliCAT\
If 15B IS TRUE in a 32bit/64bit PC, an Operator(s) folder is present, navigate to
C:\....\MagTek\IntelliCAT\
o LOCATE MtAdmin.MDB on the new PC and
o COPY and PASTE the new MtAdmin.MDB to the new 2.X_Operators NETWORK
folder.
i.e. \\server1\Magtek\IntelliCAT\2.X_Operators\