IntelliCAT Creating a 64 bit UDL for MtAdmin.MDB Installation User Support Document March, 2014 Manual Part Number: 99875664-1.01 REGISTERED TO ISO 9001:2008 MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.
Copyright © 2014 MagTek, Inc. Printed in the United States of America Information in this publication is subject to change without notice and may contain technical inaccuracies or graphical discrepancies. Changes or improvements made to this product will be updated in the next publication release. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of MagTek, Inc.
Introduction MicroSoft® announced XP will become obsolete in April 2014. For current users of IntelliCAT on an XP system, MagTek recommends upgrading to Windows 7, 32bit PC’s. Windows 7, 64bit may be used but there is a hardware limitation if Controller is used in the environment with respect to Motorized IntelliCoders purchased before January 1, 2008. Operating systems above Win 7 are neither certified nor supported by MagTek.
Win 7 64bit – Creating a 64 bit UDL for MtAdmin.MDB To create an IntelliCAT64.UDL from scratch on a Windows 64bit O.S. for use with MtAdmin.MDB: 1. Create a new text file under the root of C:\ and name it IntelliCAT64.txt 2. Right-Click on C:\IntelliCAT64.txt and select Rename the file’s extension. Change the extension from TXT to UDL. The new file name will be IntelliCAT64.UDL. 3. Next, go to the Windows Start Menu and in the first field "Search programs and files" type in RUN and click OK 4.
6. Switch to the Provider Tab and the Microsoft Jet 4.0 OLE DB Provider should be displayed, click on it to highlight it: 7. Switch back to the Connection Tab and browse or key in the default path (or network path) where the IntelliCAT Access DB is to be used (MtAdmin.
8. Switch to the ALL Tab and Select the DB Name "Jet OLEDB Database Password" as shown below and then click the "Edit Value" button: 9. Type in the encrypted MtAdmin.
10.
11. Switch back to the Connection tab and click on "Test Connection" 12. If successful, it will show it succeeded: 13. Click OK and copy the configured IntelliCAT64.UDL from C:\IntelliCAT64.UDL to the default directory of C:\Program Files (x86)\MagTek\IntelliCAT or to the appropriate directory defined in the [ODBC] section as noted in the desktop copy of the INTCAT.INI file. 14. If an Operators folder is used, make a copy of the configured IntelliCAT64.UDL and rename it to Operator64.
