Owner's manual

1
SECTION 1. FEATURES AND SPECIFICATIONS
ipe 310, Motorized Reader, can read magnetic stripe cards and is compatible with
th a Host via an RS-232 serial interface, and uses a proprietary
tion
he IntelliStrT
data format specifications: ISO (International Standards Organization), AAMVA, (American
Association of Motor Vehicle Administrators), CDL (California Drivers License). The
IntelliStripe 310 Reader can be used in environments such as self-service kiosks, vending
achines, and POS terminals. The IntelliStripe 310 is a 3-track Reader.m
he Reader communicates wiT
MCP protocol and command set, which has been developed by MagTek. Windows Drivers for
the MCP protocol are available and can support Win 95/98, NT, and Win 2000 operating
systems.
CONFIGURATIONS
The configurations of the IntelliStripe 310 are as follows:
Part Number Descrip
16050350 IntelliStripe 310, 3Trk, RS-232, with B Bezel, Stripe UP
16050351 IntelliStripe 310, 3Trk, RS-232, with C Bezel, Stripe down
16050352 IntelliStripe 310, 3Trk, RS-232, with D Bezel
16050356 IntelliStripe 310, 3Trk, RS-232, with A Bezel
STANDARD FEATURES
Standard features of the IntelliStripe 310 are as follows:
• Motorized transport
RS232 interface •
•
On board inte
command set
lligence for transporting large blocks of data using a defined protocol and
Front Card Gate prevents coins, dust, moistu rom entering the unit – gate
resists opening except when ISO-size card the unit
Power failu
• Test LED
• External B
• Flash upgradable
• Supports all magnetic stripe 3-track combinations
• re, and debris, f
enters
• re card ejection system (requires optional external capacitor)
ezel LED