User guide

Mag-Wedge Reader

Table 1-1. Part Numbers for Mag-Wedge Readers

IBM XT Uses Existing Keyboard Cable

Part Number Description

21080005 XT Tks 1,2 with CR. No PinPad Interface

21080006 XT Track 2 with CR. No PinPad Interface

IBM AT Uses Existing Keyboard Cable*

Part Number Description

21080020 AT Tracks 1,2 with CR

21080021 AT Track 2 with CR

21080012 Same as p/n 21080021 except no start and end sentinel output

21080022 AT Track 2,3 with CR

IBM PS/1, PS/2 Compatible - Uses Existing Keyboard Cable*. Cable has female mini din connector

-attaches directly to keyboard cable *

Part Number Description

21080057 PS/2 Tracks 1,2 with CR

21080072 Same as p/n 21080057 except no start and end sentinel output

21080058 PS/2 Track 2 with CR

21080073 Same as p/n 21080058 except no start and end sentinel output

21080059 PS/2 Tracks 2,3 with CR

*PINPad used is Encrypting PINPad and Cable P/N 30015040.

For other configurations, check with the factory.

CR=Carriage Return

Table 1-2. Part Numbers for Mag-Wedge Readers for Older PS/2 Computers

IBM PS/2 Reader Cable Plugs into AMP Connector on PS/2 Keyboard 7' Coiled Cable*

Part Number Description

21080050 PS/2 Track 1,2 with CR

IBM PS/2 Reader Cable Plugs into AMP connector on PS/2 Keyboard 10' Straight Cable*

Part Number Description

21080061 PS/2 Track 2 with CR

*PINPad used is Encrypting PINPad and Cable P/N 30015040.

For other configurations, check with the factory.

CR=Carriage Return