Owner manual

127
APPENDIX F. LIST OF PROPERTIES
This list shows all of the properties that are supported among the MagneSafe reader families. The properties associated with a particular MagneSafe
model are indicated with a check mark. The default setting for each property is indicated.
Properties Default
Dynamag
Dynamo
LCD
BulleT
SPP
BulleT
KB
Flash iDynamo U-Finity Insert
UART
RS-232
HID KB
PID For USB Devices 0011 0001 0011 0011 0011 0011 n/a 0014
0013
n/a
0x00 Software ID
Shows part number
of installed firmware
         
0x01 USB Serial Num
No string with a
length of zero
       
0x02 Polling Interval 1 ms
     
 
0x03 Device Serial Num
No string with a
length of zero
         
0x04 MagneSafe Version
Number
"V05"
         
0x05 Track ID Enable 0x95
         
0x07 ISO Track Mask "04040Y"
         
0x08 AAMVA Track Mask "04040Y"
         
0x0A Max Packet Size 8

     
0x0A RS-232 Comm Parameters 0x02

0x0B Activity Timeout Period 120 (0x78) seconds
   
0x0D Bluetooth Disconnect
Message
No string with a
length of zero
 
0x0D Track Data Transmission
Delay
50 (500 milliseconds)

0x0E Stay Powered After Swipe
0x00 (Don’t Stay
Powered)
   
0x0F RF Address 0x12345678 (hex)

0x10 Interface Type 0x00 (HID)

   
0x10 Interface Type 0x01 (KB)

0x10 Interface Type 0x02
 
0x10 Interface Type 0x03
 
0x14 Track Data Send Flags 0x63
   