Owner manual
Table Of Contents
- REGISTERED TO ISO 9001:2000
- SECTION 1. OVERVIEW
- SECTION 2. SYSTEM REQUIREMENTS
- SECTION 3. INSTALLATION
- INSTALLING THE MCP DRIVER
- CHANGING THE MCP DRIVER:
- REMOVING THE MCP DRIVERS
- DEVICE INSTANCE MANAGEMENT
- Device Instance Overview
- MCPCFG Utility Overview
- MCPCFG Command Summary
- Adding a Device Instance from Command Line – RS-232
- Adding a Device Instance from Command Line – USB
- Adding a Device Instance from Windows Based Application (WINDOWS 2000, XP) – RS-232
- Adding a Device Instance from Windows Based Application (WINDOWS 2000, XP) – USB
- Modifying a Device Instance Properties from Windows Based Application (WINDOWS 2000, XP) – RS-232 and USB
- Removing a Device Instance from Windows Based Application (WINDOWS 2000, XP) – RS232
- Removing a Device Instance from Windows Based Application (WINDOWS 2000, XP) – USB
- Removing a Device Instance from a Command Line – RS-232
- Removing a Device Instance from a Command Line – USB
- Displaying the List of Device Instances from Command Line
- Displaying Device Instance Properties from Command Line
- Modifying Device Instance Properties from Command Line
- Modifying Device Instance Properties From Windows Based Application
- Restarting the MCP Driver
- Stopping the MCP Driver From Command Line
- Windows Configuration Utility
- DEVICE INSTANCE PROPERTIES
- SECTION 4. TRACE LOG
- SECTION 5. APPLICATION PROGRAMMABLE INTERFACE
- TYPICAL OPERATION
- DEVICE CHANNEL LIFE CYCLE
- PROPERTIES
- COMMANDS
- NOTIFICATIONS
- FUNCTIONS
- Summary
- MCPBUS Structure
- Members
- Remarks
- The MCPBUS is used as an input parameter to many of the MCP API functions. The MCP driver modifies only those members explicitedly defined by the individual functions. For example, the API will not modify the lpOutBuffer or dwOutBufferSize members (the buffer that lpOutBuffer points to will of course be modified); therefore, the caller may set these values once and not need to reset them prior to invoking subsequent MCP API functions. The only structure members modified by an MCP API function are those explicitly identified as output parameters.
- McpEnum
- McpOpen
- McpClose
- McpReset
- McpGet
- McpCall
- McpWait
- CONSTANT DEFINITIONS
- FUNCTION PROTOTYPES
- INDEX
MagTek Communications Protocol, Driver Reference Manual
42
Propery Name Description
Core.RspTimeout
Message Response Timeout (specified in milliseconds). This is the
maximum time required for the device to process an application
command request and return a response. If this time expires, the
request will be aborted. This property should normally be kept at its
default value. This value should only be changed if a device is
compatible with other values.
Default is 5000 ms (0 is not allowed).