Owner manual
Table Of Contents
- REGISTERED TO ISO 9001:2000
- SECTION 1. OVERVIEW
- SECTION 2. SYSTEM REQUIREMENTS
- SECTION 3. INSTALLATION
- INSTALLING THE MCP DRIVER
- CHANGING THE MCP DRIVER:
- REMOVING THE MCP DRIVERS
- DEVICE INSTANCE MANAGEMENT
- Device Instance Overview
- MCPCFG Utility Overview
- MCPCFG Command Summary
- Adding a Device Instance from Command Line – RS-232
- Adding a Device Instance from Command Line – USB
- Adding a Device Instance from Windows Based Application (WINDOWS 2000, XP) – RS-232
- Adding a Device Instance from Windows Based Application (WINDOWS 2000, XP) – USB
- Modifying a Device Instance Properties from Windows Based Application (WINDOWS 2000, XP) – RS-232 and USB
- Removing a Device Instance from Windows Based Application (WINDOWS 2000, XP) – RS232
- Removing a Device Instance from Windows Based Application (WINDOWS 2000, XP) – USB
- Removing a Device Instance from a Command Line – RS-232
- Removing a Device Instance from a Command Line – USB
- Displaying the List of Device Instances from Command Line
- Displaying Device Instance Properties from Command Line
- Modifying Device Instance Properties from Command Line
- Modifying Device Instance Properties From Windows Based Application
- Restarting the MCP Driver
- Stopping the MCP Driver From Command Line
- Windows Configuration Utility
- DEVICE INSTANCE PROPERTIES
- SECTION 4. TRACE LOG
- SECTION 5. APPLICATION PROGRAMMABLE INTERFACE
- TYPICAL OPERATION
- DEVICE CHANNEL LIFE CYCLE
- PROPERTIES
- COMMANDS
- NOTIFICATIONS
- FUNCTIONS
- Summary
- MCPBUS Structure
- Members
- Remarks
- The MCPBUS is used as an input parameter to many of the MCP API functions. The MCP driver modifies only those members explicitedly defined by the individual functions. For example, the API will not modify the lpOutBuffer or dwOutBufferSize members (the buffer that lpOutBuffer points to will of course be modified); therefore, the caller may set these values once and not need to reset them prior to invoking subsequent MCP API functions. The only structure members modified by an MCP API function are those explicitly identified as output parameters.
- McpEnum
- McpOpen
- McpClose
- McpReset
- McpGet
- McpCall
- McpWait
- CONSTANT DEFINITIONS
- FUNCTION PROTOTYPES
- INDEX
Section 5. Application Programmable Interface
63
McpSet
This function is used to set the value of a property in the MCP driver, MCP device or MCP
device application. Properties can be accessed through their property ID or property name.
DWORD McpSet( HANDLE hDevice, PMCPBUS pMCPBUS );
Parameters
hDevice
Handle to the specified device (communications resource) for the property being set. This handle
was returned from the McpOpen function.
pMCPBUS
Pointer to the MCPBUS structure used by the MCP API function to perform this operation.
The following structure members are used as input parameters.
Member Meaning
dwOperAttribute MCP_ATTR_NONE - set an MCP device property
MCP_ATTR_PROP_DRIVER - set an MCP driver property
dwApplicationID Application ID (not used if MCP_ATTR_PROP_DRIVER is set)
lpszPropertyName Pointer to null terminated property name. NULL if using a Property ID
dwPropertyID Property ID. Used only if lpszPropertyName is NULL and
MCP_ATTR_NONE is set in dwOperAttribute..
dwPropertyType Property type. Used for type verification. Never use MCP_TYPE_NONE.
lpInBuffer Pointer to storage buffer containing the property value to be set
dwInBufferLen Length (in bytes) of property value contained in the buffer pointed to by
lpInBuffer
There are no structure members used as output parameters.