User`s manual

8
GENERAL
INFORMATION
2. Controls
2.1 FRONT PANEL
The front panel provides a power switch, nine control buttons, a Decrease/Increase Dial, and Vacuum
Fluorescent Display (VFD).
MODEL DSP6001
DYNAMOMETER CONTROLLER
POWER
POWER
BRAKE STATUS SET POINT SET POINT P I D
TORQUE SPEED STATUS
DECREASE INCREASE
UPDIP
DYNO SETUP SHIFT COM SETUPAUX SETUP
SPEED SET
MAX SPEED
TORQUE SET
TORQUE UNITS
BRAKE ON/OFF
POWER UNITS
DOWN
Figure 2–1 Front Panel
2.2 FRONT PANEL CONTROLS AND BUTTONS
The front panel controls and buttons, from left to right, are:
• Powerswitch
• Sixdouble-functioncontrolbutton:
Primary Function Secondary Function
BRAKE ON/OFF POWER UNITS
TORQUE SET TORQUE UNITS
SPEED SET MAX SPEED
P AUX SETUP
I COM SETUP
D DYNO SETUP
• Threesingle-functioncontrolbuttons:
• SHIFT(enablessavingfunctionandsecondaryfunctionsprintedinblueabovecontrol
buttons)
• UP-Leftarrow (moves cursor to the left)
• DOWN-Rightarrow (moves cursor to the right)
• Decrease/IncreaseDial(decreasesorincreasestheselectedparameter)
2.2.1 Enabling SEcondary FunctionS
To enable the secondary function of the double-function control buttons:
1. Press the blue SHIFT button and release it. The word “SHIFT” appears in the display:
POWER
BRAKE STATUS SET POINT SET POINT P I D
TORQUE SPEED STATUS
Figure 2–2 Secondary Function Menu