User`s manual

12
Magtrol Model DSP6001 Dynamometer ControllerChapter 2 – Controls
GENERAL
INFORMATION
2.4 REAR PANEL
The rear panel provides connectors and receptacles for connecting to appropriate equipment.
DYNAMOMETER / TSC1
AUX / TSC2
SUPPLY 2
SUPPLY 1
RS-232C
GPIB/IEEE–488
BRAKE
ACCESSORY
TORQUE–SPEED
OUTPUT
CTRL OUT
BRAKE FUSE
CAUTION: DOUBLE POLE FUSING
75VA 50/60Hz
EARTH
GROUND
FUSE (5×20mm):
120V UL/CSA 800mA 250V SB
240V IEC 315mA 250V T
(5×20mm):
UL/CSA 1.25A 250V SB
IEC 1A 250V T
MAGTROL, INC. BUFFALO, NY
Figure 2–4 Rear Panel
2.5 REAR PANEL INPUTS AND OUTPUTS

BRAKE Connect dynamometer brake cable here.
(FUSED)
+35V
REGULATION
CURRENT
Figure 2–5 Dynamometer Brake Input

BRAKE
FUSE
Contains brake fuse (5 x 20 mm)
(UL/CSA 1.25A 250V SB)
(IEC 1A 250V T)

CTRL OUT Connect to Model 5241 Power Amplifier when using HD-825
Dynamometer.

ACCESSORY
TORQUE/
SPEED
OUTPUT
Connect accessory output cable here (optional).
7 6
3 1
5 4
2
8
8. +5.0 VDC COM
7. EXTERNAL ALARM INPUT
6. ALARM RELAY (COMMON)
5. ALARM RELAY (NORMALLY CLOSED)
4. ALARM RELAY (NORMALLY OPEN)
3. ANALOG GROUND
2. ANALOG SPEED
1. ANALOG TORQUE
Figure 2–6 Accessory Torque-Speed Output
 

 
  
 