User`s manual

13
Magtrol Model DSP6001 Dynamometer Controller
Chapter 2 – Controls
GENERAL
INFORMATION

DYNAMOMETER/
TSC1
Connect dynamometer signal cable here.
14. TORQUE SIGNAL
13. TORQUE COMMON
12. D.P. B
11. INDEX
10. TACH. A
9. D.P. A
8. +5.0 VDC COM
7. +5.0 VDC
6. -24 VDC
5. -24 VDC COM
4. +24 VDC COM
3. +24 VDC
2. TACH. B
1. FLOW/CLUTCH
14 3 2
891011
6 5
1213
7
14
Figure 2–7 Dynamometer/TSC1 Connector

AUX/TSC2 Connect signal cables for the dynamometer, TM2XX or auxiliary
instrument here.
11. N/C
10. TACH. C
9. ROT_SENS
8. +5.0 VDC COM
14. TORQUE SIGNAL
13. TORQUE COMMON
12. BITE
6. -24 VDC
3. +24 VDC
2. N/C
5. -24 VDC COM
4. +24 VDC COM
1. SPARE
7. +5.0 VDC
14 3 2
891011
6 5
1213
7
14
Figure 2–8 AUX/TSC2 Connector

SUPPLY 1 Connect WB/PB DES supply for TSC1.
15. N/C
14. CURRENT SET POINT (ANALOG 0V)
13. +5.0 VDC COM
12. SUPPLY +24 VDC
11. STAND-BY CHANNEL 1
10. TEMPERATURE ALARM CHANNEL 1
9. SHIELD (EARTH)
8. W FLOW_1
7. CURRENT SET POINT (SIGNAL)
6. +5.0 VDC COM
5. SUPPLY +24 VDC
4. PRIMARY SUPPLY CONTR. CHANNEL 1
3. N/C
2. ELECTRICAL ALARM CHANNEL 1
1. SHIELD (EARTH)
14 3 25
912 11 10
68 7
14 1315
Figure 2–9 Supply 1 Connector