User`s manual

62
Magtrol Model DSP6001 Dynamometer ControllerChapter 7 – Manually Controlled Operation
OPERATION
7.2 HOW TO SET DESIRED POWER UNITS
To select the desired power units (W, kW or HP):
1. Press SHIFT.
2. Press POWER UNITS button. The display should appear as follows:
POWER
BRAKE STATUS SET POINT SET POINT P I D
TORQUE SPEED STATUS
Figure 7–2 Power Units Menu
3. Use UP  and DOWN  buttons to select desired Power Units.
4. Press SHIFT to return to main menu.
7.3 HOW TO SET DESIRED TORQUE UNITS
To select the desired torque units (N.m, N.cm, N.mm, kg.cm., g.cm., lb.ft., lb.in., oz.ft., oz.in.):
1. Press SHIFT.
2. Press TORQUE UNITS button. The display should appear as follows:
POWER
BRAKE STATUS SET POINT SET POINT P I D
TORQUE SPEED STATUS
Figure 7–3 Torque Units Menu
3. Use UP  and DOWN  buttons to select desired Torque Units.
4. Press SHIFT to return to main menu.
7.4 HOW TO SET TORQUE CONTROL
1. Beginning with the brake in the OFF position, press the TORQUE SET button. The display
should appear as follws:
POWER
BRAKE STATUS SET POINT SET POINT P I D
TORQUE SPEED STATUS
Figure 7–4 Torque Control Menu
2. Use UP  and DOWN  buttons and the Decrease/Increase dial to adjust the setpoint to
zero.