Specifications

7
Magtrol Model DSP6000 Dynamometer Controller Chapter 1 - Introduction
REAR PANEL FUNCTIONS
The rear panel, from left to right, provides the following functions:
Label Function
BRAKE Connect dynamometer brake cable here
BRAKE FUSE
Contains brake fuse (5 x 20mm)
UL/CSA 1.25A 250V SB
IEC 1A 250V T
CTRL OUT
Connect to Model 5241 Power Amplifier when usin
g
HD-825
Dynamometer
ACCESSORY TORQUE-SPEED OUTPUT
Connect accessory output cable here (optional).
For use with Ma
g
trol Readouts only. Connectin
g
another device to
this output may cause equipment failure.
DYNAMOMETER Connect dynamometer si
g
nal cable here
AUX INPUT Connect auxiliary instrument cable here
RS-232C Use this socket for RS-232 connector cable
GPIB/IEEE-488 Use this socket for GPIB cable (meets IEEE-488 specifications)
POWER Attach power cord here
EARTH GROUND Attach earth
g
round here