User`s manual

74
Magtrol WB/PB DynamometersChapter 6 – Calibration
6.1.2 cAliBrAtion Weight
The calibration weight is determined by dynamometer model, according to the table below.
Note: Use outer groove to achieve calibration in N·m when using weight
in kg.
Model
Calibration Weight
[kg]
Nominal Rated Torque
[N·m]
1 WB 2.7-8 K 0.15 0.15
2 WB 2.7-8 K 0.30 0.30
3 WB 2.7-8 K 0.45 0.45
4 WB 2.7-8 K 0.60 0.60
1 PB 2.7-8 K 0.60 0.60
2 PB 2.7-8 K 1.20 1.20
4 PB 2.7-8 K 2.40 2.40
1 WB 43 0.6 1.5
2 WB 43 1.2 3
1 PB 43 2 5
2 PB 43 4 10
1 WB 65 2 10
2 WB 65 4 20
1 PB 65 5 25
2 PB 65 10 50
1 WB 115 10 50
2 WB 115 20 100
1 PB 115 20 100
2 PB 115 40 200
1 WB 15 28 140
2 WB 15 56 280
3 WB 15 84 420
4 WB 15 112 560
1 PB 15 60 300
2 PB 15 120 600
4 PB 15 240 1200
Note: A calibration weight adapted specifically for the dynamometer can
be ordered directly from Magtrol.