Owner's manual HS 33 · HS 11 THE PASSION PEOPLE www.magura.
Contents Diagrams Introduction Preface................................12 Legend................................12 Technical Specifications Specifications.....................13 Dimensions.........................13 English Safety Intended use.......................14 Basic safety instructions.....14 . Installation Fit the brake........................16 General................................. 16 Installing brake lever............ 16 Installing brake cylinders...... 17 Adjusting brake cylinders.....
Diagrams TD 1 E G F 4 THE PASSION PEOPLE www.magura.
Diagrams A1 A2 B1 B2 English 1 1 2 T25 4 N·m (35 lbf·in) max.
Diagrams B3 HS 11 B4 HS 33 6 6 1 T25 B5 6 B6 THE PASSION PEOPLE www.magura.
Diagrams B7 C1 3 English 4 4 4 T25 6 N·m (53 lbf·in) max. T25 6 N·m (53 lbf·in) max.
Diagrams D3 D4 1 4 5 8 mm 4 N·m (35 lbf·in) max. ~5 mm HS 11 E1 HS 33 F1 1 1 1 T25 8 THE PASSION PEOPLE www.magura.
Diagrams CLOSED G1 OPEN English 5 1 7 T25 4,5 N·m (40 lbf·in) max.
Diagrams J1 1 mm min. ! K1 CLIC ! L1 L3 2 4 3 2 5 1 8 mm 4 N·m (35 lbf·in) max. 10 THE PASSION PEOPLE www.magura.
Diagrams L4 HS 11 L5 HS 33 10 8 11 9 English 6 7 T25 0,5 N·m (4 lbf·in) max. 8 mm 4 N·m (35 lbf·in) max. L6 HS 11 L7 HS 33 3 3 T25 0,5 N·m (4 lbf·in) max.
Introduction Introduction Preface Welcome to the PASSION PEOPLE, You have purchased a powerful, low-maintenance MAGURA HS hydraulic rim brake of the latest generation – developed in Germany. This owner's manual is an integral part of your MAGURA product and gives you details of the required tools, correct installation, safe use, maintenance and setup options. Please read this manual carefully before you install or use your MAGURA product.
Specifications HS 11 Type name HS 33 hydraulic (MAGURA) MAGURA Royal Blood (mineral oil) Street, tour • AllMountain • XC, XC Race Brake lever Brake fluid Applications English Technical Specifications Technical Specifications Dimensions HS 11 Type name Clamping Ø brake lever (L7) Cantilever socket distance (F) Cantilever socket brake track area min.–max. (G) Ø brake hose Rim width min.–max. Tire width max. [TD] mm HS 33 22 +0.3/-0.1 80 ± 2.0 22–32 5 18–28 64 (2.
Safety Safety Intended use Any use other than the intended use can lead to accidents that cause serious or fatal injury. MAGURA type HS 11 and HS 33 rim brakes are designed and intended exclusively –– for installation on conventional touring, trekking and mountain bikes with forks and frames that possess suitable mounting fixtures (cantilever socket), as well as on their conventional – straight – handlebars.
Safety On the Road Danger of accident due to component failure. Danger of accident due to improper behaviour or improper equipment during riding. –– Before each ride, make sure that the quick release or screw system on –– Always match your speed to the current road and weather conditions.. your wheels is fitted correctly and that your wheels will not work loose. –– Before each trip, make sure your wheels move freely and do not contact the brake pads at any point.
Installation Installation Fit the brake General LLThe following assembly steps always refer to the front wheel brake, but they are identical for the rear wheel brake unless otherwise specified. )) Make sure that the dimensions of the handlebar (clamping diameter of brake lever), cantilever sockets and wheels (brake track areas) fit your brake – see Technical Specifications, page 13. LLA thin wire may be helpful for inserting the brake hose through the bicycle frame. .
Installation Adjusting brake cylinders )) Install the wheel into the dropouts as far as it will go – preferably with- out tires. )) Make sure that the rim is located exactly in the middle between the fork blades or seat stays of the rear triangle – centre the wheel if necessary. Restricted adjustment capability. )) Make sure that the pressure point adjusting screws (TPA) (6) are unscrewed to the stop (-) [B4]. ÎÎ Brake shoes are fully advanced.
Installation Adjusting the quick release skewer )) Operate the quick release lever – open/close. LLIf the quick release lever can be closed too easily, the quick release screw (1) must be adjusted [G1]: )) Move the quick release lever up (CLOSED). )) Screw in the quick release screw by ¼ turn clockwise. )) Operate the quick release lever – open/close. )) Repeat the procedure if necessary. Installing the brake booster )) Unscrew the right adapter screw (4) (as seen from above).
LLTake some time to familiarize yourself with your new MAGURA brake – preferably away from traffic. Prior to your first ride )) Thoroughly degrease the brake track area of the rims and brake pads using brake cleaner or spirits. LLNew brake pads develop their final braking force during the running-in phase. Danger of accident caused by ill-considered operation of the brake system. –– Make yourself familiar with the arrangement of the brake levers.
Maintenance Maintenance Regular LLHow frequently you need to maintain your MAGURA product depends on how often you use it, but also on weather conditions.. Perform the following maintenance steps more frequently if you use your bicycle in extreme conditions (rain, dirt, high mileage, etc.).. If you are a frequent user, also consider the fact that this exposes your MAGURA product to more wear and thus requires more frequent maintenance intervals and checks.
Maintenance Changing brake shoes Bleeding and filling brake LLEBT (Easy Bleed Technology) makes it easy to bleed the brake. –– Use only original MAGURA brake shoes appropriate for your rim type. LLThere are 4 different original MAGURA brake shoe blends:. Black – Standard for uncoated aluminium rims. Red – High-grip blend for uncoated aluminium rims. Grey – Standard for anodised /coated aluminium rims.
Maintenance )) Push the hose cover (4) upwards [L3]. )) Unscrew the screw plug (5) from the filler hole in the brake cylinder. )) Screw the barbed fitting of the filling syringe (2) into the filler hole and tighten to a torque of max. 4 N·m (35 lbf·in) [L3]. )) Unscrew the lower clamping screw of the clamping clip on the brake lever. )) HS 11: Turn the brake lever so it is pointing vertically upwards [L4]. )) HS 33: Turn the brake lever so it is pointing horizontally forwards or backwards [L5].
Warranty Parts, components and assemblies subject to normal wear and tear are not covered under this warranty. The warranty can expire when use according to the terms is no longer applicable. To this appropriate use also belongs the conditions for operating, maintaining and servicing as prescribed in the Manual. Warranty duration and laws may vary from state to state and/or country to country. Warranty cases should be dealt normally by your dealer.
LLUnsere weltweiten Handelspartner und Service Center finden Sie unter www.magura.com LLCheck out our worldwide partners and service centers at www.magura.com Deutschland MAGURA Bike Parts GmbH & Co. KG. Eckisstraße 6. D-72574 Bad Urach. phone +49 71 25 96 94 6-0. +49 71 25 96 94 6-17 fax info@magura.de © MAGURA 2013 All rights reserved. Printed in Germany. 2 600 111 – 05-2013 Umschlag & Inhalt:. www.technische-redaktion.de Titelbild: Thomas Pagendarm LE SSION PEOP THE PAur a.com www.
