Manual

Page 1
Calibration - A Good Practice
The ATX-3 is the most accurate of all transmission fluid exchange equipment due to the
advanced load cell technology designed into the unit.
Most operating problems are usually fixed by performing a simple calibration procedure.
A good practice is to periodically calibrate the ATX-3 to ensure optimum performance.
Precision calibration weight(s) are included with the ATX-3.
TABLE OF CONTENTS
Component Description ........................ 2
Safety Precautions ........................... 3
Keypad Functions ............................ 4
Cooler Mode
Connecting to the Transmission System ........ 6
Flush .................................... 8
Drain Pan ................................ 8
Fluid Exchange ............................ 9
-1/2 Quart ................................ 9
+1/2 Quart ................................ 9
Disconnecting from the Transmission System . . . 10
Dipstick Mode
Connecting to the Transmission System ....... 11
Drain Pan ............................... 12
Fluid Exchange ........................... 12
-1/2 Quart ............................... 13
+1/2 Quart ............................... 13
Empty Used ................................ 14
Empty New ................................ 14
Maintenance ............................... 15
Calibration ................................. 16
Calibration of a Load Cell ..................... 17
Parts Identification ........................... 18
Flow Diagram ............................... 19
Wiring Diagram ............................. 20
EC Declaration of Conformity for Machinery ....... 21