Manual

Page 6
IMPORTANT
Check transmission fluid level according to manufacturer’s
instructions before connecting the ATX-3
Adjust fluid level if required
90° Adapter Hose
12 inch
Straight Adapter Hose
Transmission
Fitting
Radiator
12 inch
Adapters
Cooler Lines
560-80414-00
COOLER MODE
CONNECTING TO THE TRANSMISSION SYSTEM
1. Add desired amount of transmission fluid to the new fluid tank through the ATX-3 fill port. Monitor
fluid level in the ATX-3 with the LED readouts or with fluid sight indicators.
2. Locate and disconnect the transmission cooler lines at the most convenient location:
A. At cooler line connecting to radiator usually most accessible if vehicle is not on lift.
B. At clamped rubber hose connection to transmission cooler usually most accessible if vehicle
is on a lift. Cooler is most often in front of the radiator.
C. At cooler line connecting to the transmission usually requires vehicle to be on a lift.