Instruction Manual

Page 7
PRESS >FLUSH<
WHEN F I N I SHED
DRAIN FLUID Y/N
PRESS CONT I NUE
CLEARI NG PROCESS
RUNN I NG , WA I T
PLEASE WA I T
NEW TANK =## OZ
SELECT PROCESS
³ This will display.
When all bleeders have been closed press
FLUSH.
³ This will display.
Use right arrow key | to select Y or N to drain
remaining new fluid into the used fluid tank.
Press CONTINUE.
³ This will display if Y selected.
³ This will display if N selected.
When complete the next screen will be
displayed.
³ This will display.
Remove Master Cylinder Adapter and check
fluid level.
Press EMPTY MASTER CYLINDER to remove
fluid if required.
Pour in fluid from new fluid bottle if required.
TechALERT Demo
NEW TANK =## OZ
SELECT PROCESS
DISCONNECT POWER
TO EX I T TA DEMO
TA DEMO LF - RUN
RF - FAULT LR-DONE
³ Press and hold EMPTY MASTER
CYLINDER and FILL MASTER CYLINDER
pushbutton simultaneously for 3 seconds.
³This will display for one second and all four
LEDs will be ON.
³ Display will automatically shows text to left.
Press LF pushbutton for run mode, RF for fault
mode, LR for complete and RR for clear.
Disconnect POWER to exit.