EV-1 EXHAUST VENTILATION SYSTEM OPERATION MANUAL RTI Technologies, Inc. 4075 East Market Street York, Pennsylvania 17402 USA 717-840-0678 or 800-468-2321 www.rtitech.
Table of Contents Acceptance of Goods .................................................... 2 Description of Goods .................................................... 2 Specifications ................................................................ 2 General Safety Rules .................................................... 3 How to Prepare the unit ................................................ 4 Additional Instructions ................................................... 5 Fuse Replacement ..............
Acceptance of the Goods Upon arrival, it is necessary to check the quantity compliance of the EV-1 with the bill of lading or invoice and packing conditions to avoid the release with damage which occurred during the transport. If damage has occurred, have the forwarder apply a reserve on your documents for the damages and contact RTI Technologies. Only by observing these few rules, will it be possible to repair or replace damaged parts.
GENERAL SAFETY RULES The following rules must be strictly followed to avoid any unit damage or operator risk: G Read the labels on the EV-1. Never cover the labels.
How to Prepare the Unit ASSEMBLY OF THE MOUTHPIECE Attach the mouthpiece as shown in the picture and fasten it with the provided screws. MOUNTING OF THE HOSE Attach the hose and secure it with the clamp Put the end of the exhaust hose outside. Connect the electrical plug to the nearest outlet. The EV-1 is now ready to operate. ATTENTION! To use the EV-1 correctly, you must have an upstream differential protection system of 30 Amp.
ADDITIONAL INSTRUCTIONS MOUNTING OF THE ADDITIONAL KIT Remove power from the EV-1 before removing the mouthpiece; substitute this part with the two-way pipe. ATTENTION! Remove power from the EV-1 before removing the protection grill. The manufacturer disclaims responsibility for damage to people or objects. Lift the cover and connect the hoses. To use only one hose, take away the second hose and close the cover. FUSE REPLACEMENT Disconnect EV-1 from power.
Qty Description Part No. Qty Description Part No.
Qty Description Part No.
