User Manual

15
D I S C O N N E C T H S H O S E
A
N D S T
A
R T
A
/ C M
A
X
C O N T I N UE?
E Q U
A
L I Z I N G H O S E S
P L E
A
S E W
A
I T
D I S C O N N E C T L O W S I D E
H O S E , S H U T O F F E N G I N E
C O N T I N UE?
C L E
A
R I N G H O S E S
A
M T R E C # # . # L B
T I M E L E F T # # M I N
S T O P T O E N D
E V
A
C H O S E S C O M P L E T E
I N S T
A
L L S E R V I C E C
A
PS
A
D D O I L I F R E Q U I R E D
S T O P T O E N D
Close the high side coupler and disconnect from the
vehicle system coupler. Start the engine and place the
A/C system on max setting. Press START key.
While the engine and A/C system is running, liquid is
being removed from the services hoses. This ensures
only vapor remains in hoses.
Close the low side coupler and disconnect from the
vehicle system coupler. Turn off the vehicle engine.
Press START key.
A clearing procedure will run to remove refrigerant
from internal components.
Any vapor refrigerant remaining in the hoses will be
recovered into the RHS980.
The automatic cycle is complete when the hose
evacuation process is ended. Check level of oil
drained and add oil to the A/C system following
standard injection procedures. Reinstall service caps
onto vehicle A/C ports.
Press STOP key.