Operation Manual

6
CONTROL PANEL & DESCRIPTION
OF FUNCTION
1.POWER KEY Press to turn unit "ON" or "OFF".
2. FUNCTION
Press this key to select refrigeration, heat or dehumidification. or cooling。
3. TEMPERATURE REGULATION KEY (UP)
During cooling function：This key raises the preset temperature by 1℃
each time it is pressed to a maximum of 30℃。
During heating function：This key raises the preset temperature by 1℃
each time it is pressed to a maximum of 25℃
4. TEMPERATURE REGULATION KEY (DOWN)
During cooling function：This key lowers the preset temperature by 1℃ each
time it is pressed to a minimum of 17℃ .
During heating function
：This key lowers the preset temperature by 1℃ each time it is
pressed to a minimum of 15℃
5. L.E.D. DISPLAY
Indicates the temperature or the time setting. After any time set
the display will return to the preset temperature automatically.
7
6. SPEED Press to select either LOW, MEDIUM, HIGH or AUTO fan speed.
If "AUTO" is selected(During cooling function),”HIGH” or
"MEDIUM" or “LOW" will be selected automatically according to
the difference between setting temperature and room
temperature. .
7. PROGRAMMABLE
Programmable timer ON/OFF key.
TIMER TIMER-ON: The timer-on is used to turn on the unit automati-
cally after the set time is over.
1. Press the "TIMER" key at stand-by status to set the time
desired.
2. Once the set hour has come to an end, the unit will turn on
automatically.
3. Press the "POWER" key before time out, the setting time will
be canceled and the unit will turn on.
TIMER-OFF: The timer-off is used to turn off the unit automati-
cally after the setting time is over.
1. Press the "TIMER" key at stand-by status to set the time
desired.
2. Once the set hour has come to an end, the unit will turn off
automatically.
3. Press the "POWER" key before the time out, the setting
time will be canceled and the unit will turn off.
8.SLEEP CONTROL When setting the "sleep comfort" mode please ensure that you
FUNCTION then set the number of hours required and press the timer
button till those hours are indicated on the L.E.D display. After
Note: In heating function and dehumidifying function, the wind-speed setting is inefficacy because
the unit has setted hi
g
h-s
p
eed
(
heatin
g)
and low-s
p
eed
(
dehumidif
y
in
g)
.