Operation Manual

8
setting the hours the L.E.D. display will automatically return to
the current pre-set temperature. To increase this setting "up"
press button indicating and for each press, the temperature will
be increased by 1℃. Likewise to set for a lower temperature
press button indicating and for each press the temperature will
be decreased by 1℃.
During the course of this cycle, to ensure maximum sleep
comfort. the micro-processor memory will raise the pre-set
temperature 0.5℃ each half hour to a maximum of 2℃ over two
hours and then maintain that temperature for the balance of the
time set.
The portable air conditioner is fitted with a 3 minute compressor
delay protection circuit which simply means that the compressor
requires 3.5 minutes to start. From either being switched on, or
when changing from “dehumidify” to any air conditioning cycle
chosen.
9. ALARM
When the water tank is full,"E4" will be displayed on the display panel.
To resume operation, please remove the rubber cap of the drain hose to
drain out the water firstly. After finishing draining the water out ,please
restart the unit and then the unit can operate normally.
9
REMOTE CONTROL FUNCTION
1. POWER
2. FUNC
3. TIMER
4. AUTO
5. HI
6. MID
7. LOW
8. SLEEP
9. TEMP.
Stop/Start switch
Function “MODE” selector
Hourly programming
Automatic fan speed
High fan speed
Medium fan speed
Low fan speed
Night operation selector
Temperature selector