INSTALLATION MANUAL G6 @ 1. New installations NOTE ME 1. Supply fines should bg purged to clean impurities before connecting the unit. 2. The hot water supply should be connected to the left and the cold water: supply to the right, when viewed from the operating position, If this is not taken into account.can cause permanent damage tithe cartridge. 3. Screw connections and test for leaks: 4; Using a spirit level:on the tams, the misaligned horizontally, vertically dnd parallel to the walk 5.
{7, Water test and leak detection ] 1, After connecting all pipes, please dis-assembling the plastic protection cover, and switch on/off th cartridge, check all connections without afy leakage, and all connections connecting to the required functional outlets, € the plastic protection cover to the salve. i 8. Wall sling program: 1: Use parallel ruler to make sure the wall and valve being parallel. wall 9. Cover handholds installation | 1. Take off the plastic protection cover. 2.