User Manual

11
B341851335W00
16 /19
x34
Position the Back Panel (I) as shown. Flush with the lower edge of the Bottom (G).
Align squarely with outer edges and nail straight into the raw edge of the panels.
turn the unit onto its front
apagar la unidad en su frente
and/or serious injury.
Failure to do so could cause instability, product collapse,
All nails must be driven into the parts straight and centered.
Please make sure that the Back Panel is attached securely.
WARNING
Por favor asegúrese que el Panel Trasero se atan
firmemente. Todos los clavos deben manejarse en las partes
recto y centro. El fracaso para hacer para que podría causar
inestabilidad, derrumbamiento del producto, y/o la lesión
seria.
ADVERTENCIA
Assure that the unit is square.
Distance from corner to corner must be
equal as shown.
IMPORTANT!
THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
All nails should be used. This is the single most important step for overall strength and stability.
This is what keeps the unit from wobbling.
7
7
raw surface
superficie cruda
G
I