VENDOR STOCK NUMBERS OAK HOLLOW CORE TV STAND ks e A WARNING TOP PANEL MAXIMUM LOAD 100 LB (45 KG) THE TOP SHELF OF THE UNIT IS INTENDED TO HOLD MOST CRT TVS HOLDS LCD / PLASMA TYS UP TO 42" WITH A PRODUCT WEIGHT OF NOT MORE THAN 100 POUNDS (45KGS). THE BASE OF THE TELEVISION SET MUST MIDDLE SHELF MAXIMUM LOAD REST ON THE SUPPORTING SURFACE OF THE UNIT 20 LB (9.09 KG} WITHOUT EVER-HANGING THE EDGES.
VENDOR STOCK NUMBERS OAK OAK HS2012-234ES-ESPRESSO BLACK OAK A BEFORE STARTING TOOLS NEEDED TO ASSEMBLE . Read and understand all the steps carefully before starting. If each step is not followed in the correct order the assembly will be difficult m and may result in damages. . Work in a spacious area, preferably on a carpeted surface, near where the unit will be used, . Make sure all the parts are included. Most boards are labeled with a removable sticker, © hammer flat hnd.
VENDOR STOCK NUMBERS OAK OAK MS19-D1-1009-13-TRUE BLACK OAK e T = Top panel Side panel Bottom panel (Qty: 1) (Qty: 2) {Qty: Partition board Middle shelf Foot {Qty: 2) (Qty: 1) {Qty: 5) We are available to assist yov Monday -Friday from 9:00 am 5:00 pm Eastern Standard Time. VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING 1-800-729-1569 USA only.
VENDOR STOCK NUMBERS OAK OAK MS19-D1-1009-13-TRUE BLACK OAK @ @ Cam bolt Cam lock Wood dowel Qty: 12 Qty: 12 Qty: Dong O Taping screw Foot pad Qty: 8 Qty: 5 We are available to assist yov Monday -Friday VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING Eastern Standard Time. USA only.
HOLLOW CORE TV STAND VENDOR STOCK NUMBERS OAK OAK BLACK OAK CAM FASTENING SYSTEM Screw the cam bolt into the prevailed panel. The screw should be tightened so no threads are visible. The larger ring of the cam should touch the panel. Insert the cam lock into the prevailed hole in the panel. The plus and minus signs should be facing the outside of the panel. Connect the previously tightened cam bolt with the panel connected into the cam lock.
] Insert hardware @, @ and @ into part shown. 2 Insert hardware @D, @ and @ into part shown.
Attach part A to part B & D and then tighten the cam locks @. Attach part C to the structure using screw @ as shown.
Attach hardware ® on part F as shown. Assembly 5 foot as shown, turn clockwise until fight.
Now Your Unit Is Completed DO NOT REMOVE < s Please call for replacement parts or assistance: 1-800-729-1569 Monday Friday 9:00 am 5:00 pm EST 10
SOPORTE DE TV VACIÓ NUMERO DE STOCK DEL VENDEDOR HS2012-234BKO-NEGRO ROBLE HS2012-234CM-ROBLE RUSTICO HS2012-234ES-CAFE EXPRÉS H52012-234WTE-BLANCO MS19-D1-1009-13-VERDADERO ROBLE NEGRO A ANTES DE COMENZAR HERRAMIENTAS NECESARIAS PARA ENSAMBLAR . Leer y entender todos los pasos cuidadosamente antes de comenzar. si no se sigue cada paso en el orden correcto, el montare ser difícil y puede ocasionar dacios, . Trabajar en una zona amplia, mejor sobre la alfombra, cerca del sitio donde la unidad se utiliza, .
NUMERO DE STOCK DEL VENDEDOR ” HS2012-234BKO-NEGRO ROBLE SOPORTE DE TV Vació HS2012-234ES-CAFE EXPRÉS H52012-234WTE-BLANCO ROBLE NEGRO e T = Panel superior Panel lateral Sane! inferior {Cantidad: 1) {Cantidad: 2) {Cantidad: PRURIGO Placa de división Estante intermediario Pie {Cantidad: 2) {Cantidad: 1) {Cantidad: 5) , Estamos disponibles para ayudarlo de Lunes Aciemes VERIFIQUE QUE TODAS LAS PIEZAS ESTÉN EN LA LISTA ANTES de 9:00 am 5:00 pm Hora de la Zona Este. DE COMENZAR 1-800-729-1569 Solé EEU.U.
NUMERO DE STOCK DEL VENDEDOR ” HS2012-234BKO-NEGRO ROBLE SOPORTE DE TV Vació HS2012-234ES-CAFE EXPRÉS H52012-234WTE-BLANCO ROBLE NEGRO @ @ Tornillo de combadura Cerrojo de combadura Clavija de madera Cantidad: 12 Cantidad: 12 Cantidad: Domingo O Tornillo refrescante Almohadilla de pie Cantidad: 8 Cantidad: 5 , Estamos disponibles para ayudarlo de Lunes Aciemes VERIFIQUE QUE TODAS LAS PIEZAS ESTÉN EN LA LISTA ANTES de 9:00 am 5:00 pm Hora de la Zona Este. DE COMENZAR 1-800-729-1569 Solé EEU.U.
SOPORTE DE TV VACIÓ NUMERO DE STOCK DEL VENDEDOR HS2012-234BKO-NEGRO ROBLE HS2012-234CM-ROBLE RUSTICO HS2012-234ES-CAFE EXPRÉS ROBLE NEGRO SISTEMA DE FIJACIÓN CAM Atornille el Tornillo de combadura en el panel pre taladrado. El tornillo debe apretarse para que no haya roscas visibles. El anillo més grande del cam debe tocar el panel. Inserte el Cerrojo de combadura en el agujero pre taladrado en el panel. Los signos de mas y menos deben estar orientados hacia el exterior del panel.
muestra, ] Inserte el harreare parte B y D como se Inserte el harreare parte A y E como se muestra, La flecha del camello debe apuntar al orificio taladrare La flecha del camello debe apuntar al orificio pre taladrado x16 ) L@ x8Jl® x4Jl© Tornillo de combadura Cerrojo de combadura Clavija de madera Tomillo de combadura Cerrojo de combadura Clavija de mudan 6
Adjuntar parte A a la parte luego apriete las cerraduras de leva Adjuntar la parte C a la estructura con e tornillo @ como se muestra.
Adjuntar el harreare ® en la parte F como se muestra. Asamblea 5 piezas de pie como se muestra, gire en sentido horario hasta que queden apretadas y ponga almohadilla.
Ahora Tu Unidad Esté Compuesta N' LEVEN PAS Por favor de llamarnos para piezas de reemplazo o ayudas: 1-800-729-1569 Lunes-Viernes EST 10