User Manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
RTS889W
PAGE 1 OF 3V-3
COURTYARD CREATIONS INC.
HEX. KEY WRENCH 4MM
WASHER d8.5*D17*1.6
HEX. KEY WRENCH 6MM
SEAT ASSEMBLY
1
2
3
4
5
6
1
7
8
1
1
1
1
1
4
1
2
1
1
RTS889W-CS11-1
18000744004
RTS889W-CS12-1
17EF1201-----23
17FA05100701-Y4
17KAA0101----Y4
17KAA0201----Y4
PARTS LIST
PART
NO.
MATERIAL CODE PART Q’TY
SEAT POST
17FA08060601-YX
17D03A040401-YX
NUT WRENCH 10&13MM
17KAB1101----Y4
FIGURE 1
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the seat assembly (#1) onto a non-abrasive
surface, such as a carpet, with its underside facing
upwards. Fasten the seat post (#2) to the brace on the
seat assembly (#1) by using bolts (#5), washers (#7 and
#9), and jam nuts (#10). See Figure 1.
BASE ASSEMBLY
BOLT M6*35
JAM NUT M8*1.25
WASHER d6.5*D30*2.0
WASHER
8
17C40A0712001YX
DECORATIVE
PLASTIC COVER
RTS889W-CS01
Use the correct bolts as indicated. Do not tighten any of the bolts until the swivel rocker chair is completely
assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
!
!
!
!
!
4
9
10
11
13
12
17C03A0816041YX
BOLT M8*45
STOP DO NOT RETURN TO THE STORE!
45
1
2
#5 BOLT M8*45
1
5
5
7
7
7
7
9
9
10
10
2