MAINSTAYS PERKINS DESK WITH METAL FRAME WITH STORAGE FOR FILE CABINET VENDOR STOCK NUMBERS MsS18-D1-1009-33 WHITE MS18-D1-1009-34 TRUE BLACK OAK MS18-D1-1009-35 COCOA TOP PANEL MAXIMUM LOAD 100 LB {45 KG) DRAWER BOTTOM PANEL 1 MAXIMUM LOAD 15 1B (6.8 KG}) DRAWER BOTTOM PANEL 2 MAXIMUM LOAD 10 LB (4.5 KG} RECOMMENDED NUMBER OF PEOPLE FOR ASSEMBLY : 1 ESTIMATED ASSEMBLY TIME: 1 HOUR CALL QUR TOLL FREE NUMBER 1-800-729-1569 FOR FURTHER ASSISTANCE. ADDITIONAL PARTS ARE AVAILABLE FOR A FEE.
VENDOR STOCK NUMBERS MAINSTAYS PERKINS DESK WITH METAL FRAME WHITE WITH STORAGE FOR FILE CABINET M518-D1-1009-34 TRUE BLACK OAK MS18-D1-1009-35 COCOA A BEFORE STARTING TOOLS NEEDED TO ASSEMBLE . Read and understand all the steps carefully before starting. If each step is not followed in the correct m order the assembly will be difficult and may result in damages. . Work in a spacious area, preferably on a carpeted surface, near where the unit will be used. . Make sure all the parts are included.
VENDOR STOCK NUMBERS MAINSTAYS PERKINS DESK WITH METAL FRAME M518-D1-1009-33 WHITE WITH STORAGE FOR FILE CABINET M518-D1-1009-34 TRUE BLACK OAK M518-D1-1009-35 COCOA Top panel Left panel Middle panel (Qty: 1} Qty:1) (Qty: 1) \ Right panel Crossbar 1 Crossbar 2 (Qty: 1) Qty: 1) (Qty: Back panel 1 Back panel 2 Stopper rail Qty: 1) Qty: 1) Qty: 1) We are available to assist you Monday -Friday from 9:00 am 5:00 pm Eastern Standard Time., VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING USA only.
MAINSTAYS PERKINS DESK WITH METAL FRAME WITH STORAGE FOR FILE CABINET VENDOR STOCK NUMBERS MS18-D1-1009-33 WHITE M518-D1-1009-34 TRUE BLACK OAK MS18-D1-1009-35 COCOA Door panel Drawer front panel 1 {Qty: 1) (Qty: 1) = Drawer right panel @ Drawer back panel 1 (Qty: 2) 1) Drawer bottom panel 2 Drawer support panel (Qty: 1) (Qty: Drawer front panel 2 Drawer left panel (Qty: 1} (Qty: 2) Drawer back panel 2 Drawer bottom panel 1 {Qty: 1} {Qty: 1} Q _— Metal side frame Metal tube (Qty: 1) (Qty: 1) VERIFY THAT ALL
VENDOR STOCK NUMBERS MAINSTAYS PERKINS DESK WITH METAL FRAME M518-D1-1009-33 WHITE WITH STORAGE FOR FILE CABINET M518-D1-1009-34 TRUE BLACK OAK MS18-D1-1009-35 COCOA Cam bolt 1 Cam bolt 2 Cam lock 1 Cam lock 2 Wood dowel Screw 1 Screw 2 Qty: 26+1 Extra Qty: 1 City: 26+1 Extra Qty: 1 Qty: 25+1 Extra Qty: 8 Qty: Screw 3 Screw 4 Screw 5 Screw 6 Qty: 32+1 Extra Qty: 4 Qty: 10 Qty: 3 Qty: 2 ® Allen key Plastic connector Slide Qty: 1 Qty: 4 Qty: 2 We are available to assist you Monday -Friday from 9:00 am 5:00 pm
MAINSTAYS PERKINS DESK WITH METAL FRAME WITH STORAGE FOR FILE CABINET VENDOR STOCK NUMBERS MS18-D1-1009-33 WHITE M518-D1-1009-34 TRUE BLACK OAK MS18-D1-1009-35 COCOA CAM FASTENING SYSTEM Screw the cam bolt into the prevailed panel. The screw should be tightened so no threads are visible. The larger ring of the cam should touch the panel. Insert the cam lock into the prevailed hole in the panel. The plus and minus signs should be facing the outside of the panel.
Insert hardware @ @ ® into [ Insert hardware @ @ ® into part shown.
Insert hardware into part B as shown, then attach slide 18a using screw ® as shown.
then attach slide 18b using screw @ as shown, Insert hardware into part D as shown, 4 ~, approx.
Insert hardware O@® on the First side of part C, then attach slide 18b using screw ® as shown, Then, flip to the opposite side of part C and insert hardware Then attach slide 18a using . screw @ as shown. N arrow of cam lock points to prevailed hole immures, \ Opposite side @x7) (@ [x2] x2 | x1 | Cambodia Cam lock 1 Wood dowel Screw 3 Screw 4 Plastic stopper EVA pad Slide 10
Insert hardware @ ® into part shown. J Cam lock 1 Wood dowel arrow of cam lock points to prevailed hole Attach hinges @ to part J using screw ® as shown.
9 Attach part part O using screw @ as shown, then insert part Q to the bottom as shown. Insert hardware @ @ @ into part shown.
Attach part K to the structure using screw ® as shown. Screw 1 Attach part part P using screw @ as shown, then insert part R to the bottom as shown.
Attach slide 18¢ & 18d on part M & N using screw & as shown, then tighten the cam lock @ on part S.
Attach part | to part B and then tighten the cam locks . 15 15 Attach slide 18¢ & 18d on part M & N using screw ® as shown.
using screw bolt @ and attached Allen key as shown. Tighten the bolts completely in order to avoid wobble/instability.
Attach part A to the structure and then tighten the cam locks . 23 Assemble the door panel J on part B using screw ® as shown. “Lateral adjustment by screw adjustment Disgusting possibilities & I > *Front-to-back by .
Put the drawers inside as shown, Now Your Unit Is Completed Please call for replacement parts or assistance: 1-800-729-1569 Monday Friday 9:00 am 5:00 pm EST 20
MARINISTAS PERINÉS ESCRITORIO CON EL MARCO DEL METAL CON EL ALMACENAJE PARA EL GABINETE DEL ARCHIVO NUMERO DE STOCK DEL VENDEDOR MS18-D1-1009-33 BLANCO MS18-D1-1009-34 VERDADERO ROBLE NEGRO MS18-D1-1009-35 CACAO A ANTES DE COMENZAR HERRAMIENTAS NECESARIAS PARA ENSAMBLAR Leer y entender todos los pasos cuidadosamente antes de comenzar. si no se sigue cada paso en el orden correcto, el montaje ser difícil y puede ocasionar dacios.
MARINISTAS PERINÉS ESCRITORIO CON EL MARCO DEL METAL MOMERO DE STOCK DEL VENDEDOR CON EL ALMACENAJE PARA EL GABINETE DEL ARCHIVO MS18-D1-1009-34 VERDADERO ROBLE NEGRO MS18-D1-1009-35 CACAO Panel superior Panel izquierdo Panel del medio {Cantidad: 1) (Cantidad: 1} {Cantidad: Panel derecho Travesaño 1 Travesaño 2 {Cantidad: 1) (Cantidad: 1) (Cantidad: Panel posterior 1 Panel posterior 2 Carril de parada {Cantidad: 1) {Cantidad: 1) {Cantidad: 1} Estamos disponibles para ayudarlo de Lunes Vieres VERIFIQUE QUE T
NUMERO DE STOCK DEL VENDEDOR MARINISTAS PERINÉS ESCRITORIO CON EL MARCO DEL METAL BLANCO CON EL ALMACENAJE PARA EL GABINETE DEL ARCHIVO MS18-D1-1009-34 VERDADERO ROBLE NEGRO MS18-D1-1009-35 CACAO Panel de puerta Panel frontal del cajón 1 {Cantidad: 1) (Cantidad: 1} = Panel derecho cajón @ Panel posterior del cajón 1 (Cantidad: 2) (Cantidad: 1) Panel inferior del cajón 2 Panel de soporte del cajón {Cantidad: 1} {Cantidad: Panel frontal del cajón 2 Panel izquierdo cajón (Cantidad: 1) {Cantidad: 2) Panel poste
MARINISTAS PERINÉS ESCRITORIO CON EL MARCO DEL METAL MOMERO DE STOCK DEL VENDEDOR CON EL ALMACENAJE PARA EL GABINETE DEL ARCHIVO MS18-D1-1009-34 VERDADERO ROBLE NEGRO MS18-D1-1009-35 CACAO @G) b S & Tornillo de Tornillo de Cerrojo de Cerrojo de Clavija de madera Tomillo 1 Tomillo 2 combadura 1 combadura 2 combadura 1 combadura 2 Cantidad: 25+1 Extra Cantidad: 8 Cantidad: 4 Cantidad: 26+1 Extra Cantidad: 1 Cantidad: 26+1 Extra Cantidad: Tomillo 3 Tornillo 4 Atornille 5 Tornillo & Tornillo Taco plástico Almoh
MARINISTAS PERINÉS ESCRITORIO CON EL MARCO DEL METAL CON EL ALMACENAJE PARA EL GABINETE DEL ARCHIVO NUMERO DE STOCK DEL VENDEDOR MS18-D1-1009-33 BLANCO MS18-D1-1009-34 VERDADERO ROBLE NEGRO MS18-D1-1009-35 CACAO SISTEMA DE FIJACIÓN CAM 1. Atolle el Tornillo de combadura en el panel taladrador. El tornillo debe apretarse para que no haya roscas visibles. 2. El anillo més grande del cam debe tocar el panel. 3. Inserte el Cerrojo de combadura en el agujera pre taladrado en el panel.
Inserte el harreare Inserte el harreare parte A y | como se muestra. parte Ey Fy S como se muestra.
Inserte el harreare en la parte B como se muestra, luego file la diapositiva 18a usando el tomillo & como se muestra. flecha del .
file la diapositiva 18b usando el tomillo & como se muestra.
Inserte el harreare O@® en el primer lado de la parte C, luego fije la diapositiva 18b usando el tornillo ® como se muestra. 5 Ruego, voltea al lado opuesto de la parte C y inserte el = harreare Lego fije la diapositiva 18a usando . el tornillo & como se muestra. flecha del camello debe apuntar al orificio pre taladrado frenarme, / . .
Inserte el harreare parte G y H como se muestra. (@ [x10] [ x'|3 Cerrojo de Clueca de mude combadura 1 La flecha del camello debe apuntar al orificio pre taladrado File las bisagras @ a la parte J usando el tornillo (8 como se muestra.
Inserte el harreare parte Ky L como se muestra. Lefi@ Q| x1 D[x4) x4 ] Tornillo de Tornillo 2 Conector de combadura 2 plástico Fije la parte parte O usando el tornillo @ como se muestra, luego inserte la parte Q en la parte inferior como se muestra.
® |x4 Tornillo 1 Fije la parte K a la estructura usando el tomillo ® como se muestra. Fije la parte parte P usando el tornillo @ como se muestra, luego inserte la parte R en la parte inferior como se muestra.
1 2 Filie la parte L a la estructura usando el tornillo ® romo se muestra. Fije la diapositiva 18cy 18d en la parte My N usando el tomillo & como se muestra, luego apriete las cerraduras de la leva @ om parte ©[x4) Tornillo 1 Tornillo Diapositiva —l .
usando el tornillo @ como se muestra.
Fije la parte A a la estructura y luego apriete las cerraduras de leva @.
Poner el cajones dentro como se muestra.