User Manual

Customer Service Support: 1-800-379-9773

Turn the Star Base (2) upside down. Press the Casters (4) into holes at the end

of each leg. Turn the Star Base (2) upright and insert Gas Lift with Telescoping

Cover (5) into the center hole of Star Base (2).

Step 3

Step 5

Step 4

Turn assembled seat upright and locate central hole of Seat Plate (6) over Gas Lift (5).

Push down firmly until connection is secure.

Align Seat Plate (6) over pre-drilled holes on the underside of the Seat Cushion (8)

with front of seat plate facing the front of the seat cushion. Attach the Seat Plate

(6) to Seat Cushion (8) using 4 Bolts (A2) as shown. Tighten all the bolts with the

enclosed Allen Key (C).

Assembly Instructions