Use and Care Guide

QwikLug
TM
QwikLug
TM
Compressor Terminal Repair Kits
Mainstream’s patented product, QwikLug
™
, easily attaches
to damaged or corroded spade connectors.
QwikLug
™
has color-coded leads to connect to existing wiring. The
outer connector housing is a nylon insulator, eliminating
the potential for shorting. It’s that easy!
`` Replaces damaged or corroded terminals
`` Fits all standard compressor terminals
`` Easily tightens from the front
`` Optional set screws for tight installations
`` Provides a durable brass connection,
tested for more than 100,000 compressor starts
`` Fully insulated brass connector
`` Available with 10 AWG or 12 AWG leads in 2’ or 4’ lengths
`` 2’ leads have been pre-stripped at the wire connection end
`` 4’ leads have fully insulated female connectors for connection
directly to the contactor
Directions for use:
1. Clean the damaged
or corroded terminals.
2. Push the QwikLug™
connector
onto the terminal.
3. Tighten from the front.
For more details or information about QwikLug™, visit www.qwik.com
QwikLug
TM
Compressor Terminal Repair Kits Ordering Information
Mainstream Engineering Corporation®
1-800-866-3550
www.qwik.com
MKTG000021_REV-B / 2000805
MADE IN THE U.S.A.
QwikProducts™ and QwikLug™ are trademarks of Mainstream Engineering Corporation.
Rockledge, Florida 32955, [phone]
U.S. Patents #6,048,233 & #6,565,393 All QwikProducts™ are made in the USA
Finally... a Quick & Simple Method to Repair Compressor Terminals!
y QT2810 - Package of 3 QwikLugs™ with 10 AWG 2’ Leads
y QT2812 - Package of 3 QwikLugs™ with 12 AWG 2’ Leads
y QT2910 - Package of 3 QwikLugs™ with 10 AWG 4’ Leads
y QT2912 - Packages of 3 QwikLugs™ with 12 AWG 4’ Leads
QwikLug™ Depth-Set Instructions
Caution! Slide QwikLug™ over metal NOT over insulator.
YES NO
Optional Set Screws
When installing QwikLugs™ where space is restricted,
simply replace phillips head screws
with optional set screws.
QwikLug™ Depth-Set Instructions
Caution! Slide QwikLug™ over metal NOT over insulator.
YES
NO
Optional Set Screws
When installing QwikLugs™ where space is restricted,
simply replace phillips head screws
with optional set screws.
QwikLug™ Depth-Set Instructions
Caution! Slide QwikLug™ over metal NOT over insulator.
YES
NO
Optional Set Screws
When installing QwikLugs™ where space is restricted,
simply replace phillips head screws
with optional set screws.
QwikLug®
Depth-Set
Instructions
CAUTION!
Slide QwikLug®
over metal.
NOT
over insulator.
Optional
Set Screws!