MONSIEUR TRICOT User manual English Version 1.0 issued on 11-06-2019 Monsieur_Tricot_User_Manual_V2.
MONSIEUR TRICOT Preface 4 The story of Monsieur Tricot Collection overview Intended use 4 5 6 Safety instructions 6 STANDING Product overview standing Parts list Specifications Adapter specifications Accessories Monsieur_Tricot_User_Manual_V2.
Installation Check the content of the package Charging the led light Installation of the Casambi app Making connection with the lamp(s) 20 20 20 20 21 Use Change the lamp profile Create a group Switching the lamp(s) on and off Dimming lamp(s) and groups Gallery Create a scene Set a timer 22 22 22 22 23 23 24 24 Wireless remote Product overview Installation Adding scenes 25 25 25 26 Maintenance Replacing the light source Cleaning the cover 27 27 32 Troubleshooting 36 Disclaimer 36 Disposal 3
PREFACE Congratulations on the purchase of your Monsieur Tricot lamp. Its warm glow and hand-crocheted or knitted fabric will cast beautiful shadows as a magical backdrop for long, cosy summer nights. The Monsieur Tricot hanging and standing objects form a complete family of lights – you can read their story below. This user manual contains all the necessary information for a correct, efficient and safe use of your lamp.
COLLECTION OVERVIEW dia 30cm 080130S dia 40cm 080140S Madame Latoque dia 60cm 080160S dia 30cm 080230S dia 40cm 080240S Madame Cachet dia 30cm 080330S dia 40cm 080340S dia 50cm 080350S 00-White 10-Linen 89-Wengé 60-Brick 30-Moss Monsieur Tricot collection • User manual Monsieur_Tricot_User_Manual_V2.
INTENDED USE The product is only intended as in- or outdoor led lighting. Any change to the product can have consequences for safety, warranty and correct operation. SAFETY INSTRUCTIONS 6 6 6 6 6 6 6 6 Only use the product as described in this manual. Do not use a damaged product. Do not drop the product and avoid bumping. Do not use the product if a part is damaged or defective. Replace a damaged or defective part immediately. Always switch off the power before starting installation or maintenance work.
PRODUCT OVERVIEW STANDING A B C D E F G H I J PARTS LIST A B C D E Base Strain relief Allen screw Lamp holder Countersunk head screw Monsieur Tricot collection • User manual Monsieur_Tricot_User_Manual_V2.
SPECIFICATIONS Power 25W Light source Dimmable LED included Voltage 12V Wattage 3.5W (+15.6W when charging) Average lifetime ≥ 5000 hrs Cycles on/off ≥ 45000 Starting time Within 1 sec Warm-up time to 60% of the full light output Immediately full light output Light source dimensions 178 x 85 mm Luminous flux 235 Lumen Luminous efficacy 72 Lumen/Watt Lumen maintenance L70 Colour rendering index Ra.
INSTALLATION CHECK THE CONTENT OF THE PACKAGE Check if all parts from the parts list are present and that no damage is visible on the parts. In case parts are missing or damaged, please contact your local Tribù dealer. CHARGING THE LED LIGHT 1. 2. 2 Plug in the adapter. Make sure the white stripe on the end of the cable is facing up. Charge the battery for at least 5 hours. The battery is fully charged when the LED light next to the LED filaments is off. INSTALLATION OF THE CASAMBI APP 1. 2. 3. 4.
MAKING CONNECTION WITH THE LAMP(S) 1. Tap ‘Nearby devices’. All light sources supported by the Casambi app are shown. 2. Select a lamp. 2 Tap ‘Identify lamp’ to check which lamp is activated. The lamp will start blinking. 3. Tap ‘Add to…’. The existing networks are shown. 2 When you use the Casambi app for the first time it will automatically create a network that can only be accessed with the device that has created this network. 4. Select the automatically created network.
USE CHANGE THE LAMP PROFILE 1. 2. 3. 2 In the ‘Lamps’ tab, double tap a lamp. Under ‘Information’ you can change the name of the lamp and give it an icon. Under ‘Start status for activation’ you can select the ‘Standard mode’ and ‘Last status’. In the ‘Standard mode’ the lamp will be switched on at 100%. In ‘Last status’ the lamp is switched on in the settings as when it was last switched off.
2 Tap ‘All lamps’ to switch on all lamps. Tap again to switch off all lamps. DIMMING LAMP(S) AND GROUPS 1. 2. 2 2 Go to the ‘Lamps’ tab. Touch and hold any lamp or group on the screen and move your finger to the left or right to determine the dimming percentage. Open a group by double tapping it. This way you can dim a lamp which is part of a group. Tap and hold any lamp on the screen for three seconds to open the dim bar.
CREATE A SCENE The ‘Scenes” tab allows you to save different scenes. 1. 2. 3. 4. 5. 6. 7. 2 Set up your lamps to the desired intensity. Tap the ‘Scenes’ tab. Tap ‘Edit’ in the top right corner. Tap the plus icon in the top left corner. Enter a scene name. Tap ‘Add scene’ and select the lamps that you want to add to the scene. Tap ‘Done’ in the top right corner. Repeat these steps, if you want to save another scene.
WIRELESS REMOTE PRODUCT OVERVIEW The wireless remote is a wall control button that you can use to easily control your lamp(s). K M L R N Q K L M N Preset button 1 Multi-purpose button 1 Preset button 2 Dim up O P O P Q R Preset button 3 Multi-purpose button 2 Preset button 4 Dim down 26 Monsieur_Tricot_User_Manual_V2.
INSTALLATION 1. 2. 2 3. 4. Open the Casambi app on your phone. Tap ‘Nearby devices’ and select the Casambi Express. Make sure that the Casambi Express is active by pressing two buttons simultaneously. Tap ‘Add to…’. The existing networks are shown. Select the desired network. The Casambi Express is connected to the network. ADDING SCENES 1. 2. Select one of the four options. Select the desired scene. The scene has been added to the option.
MAINTENANCE REPLACING THE LIGHT SOURCE 2 1 1. 2. Turn the sphere counter clockwise until it is free of the bayonet catch. Remove the sphere. 4 3 3. 4. Loosen the countersunk head screws of the lamp holder. Remove the lamp holder. 28 Monsieur_Tricot_User_Manual_V2.
5 5. Loosen the Allen screws of the strain relief. 6 6. 7. Turn the lamp lid counter clockwise to remove the lamp holder. Replace the LED light with a new LED light. Monsieur Tricot collection • User manual Monsieur_Tricot_User_Manual_V2.
8 8. Fasten the lamp holder by turning the lamp lid on to the LED light. 10 9 9 9. Place the charging port on the strain relief. Make sure to point the white marking on the charging port upwards. 10. Fasten the Allen screws of the strain relief. 2 30 Monsieur_Tricot_User_Manual_V2.
11 12 11. Place the lamp holder. Make sure to place the lamp holder correctly by using the bayonet catch. 12. Fasten the countersunk head screws of the lamp holder. 2 Monsieur Tricot collection • User manual Monsieur_Tricot_User_Manual_V2.
14 13 13. Place the sphere in the bayonet catch. 14. Turn the sphere clockwise until it is fastened. 15. Test whether the lamp is functioning properly. 32 Monsieur_Tricot_User_Manual_V2.
CLEANING THE COVER 2 1 1. 2. Turn the sphere counter clockwise until it is free of the bayonet catch. Remove the sphere. 3 3. Loosen the elastic band of the removable cover. Monsieur Tricot collection • User manual Monsieur_Tricot_User_Manual_V2.
