Model MJ-9200D Vented Dryer After sales service provided by Sears Service nationwide Owners Manual Very Important ! Read Installation Instructions On Page 5 Website: http://www.MajesticAppliances.com Check this website under Models for the most up-to-date manual.
Important Safety Instructions WARNING- To reduce the risk of fire, electric shocks, or injury to persons when using your appliance, follow the basic precautions, including the following: 1. Read all instructions before using the appliance. 2. Do not wash articles that have been previously cleaned in, washed in, or spotted with gasoline, dry-cleaning solvents, or other flammable and explosive substances such as solvents. 3. Do NOT leave machine unattended when in use. 4.
Welcome... Congratulations. Welcome to the growing family of Majestic™ Appliance owners. By choosing a Majestic Appliances model as your laundry appliance you not only found the best in reliable technology, but above all you have found a faithful and untiring convenience appliance. Your machine is strong, reliable and long lasting. All those qualities which have made the Majestic™ trademark famous the world over. Above all, Majestic products are easy to use.
Table of Contents Instant help Page 5 Getting things ready to install your appliance Unpacking, Inspecting, Electricity, Closets/ Alcoves, Plumbing, Venting Page 8 Selecting dry cycles Page 10 Troubleshooting Page 11 Maintenance tips Page 13 Warranty Information Drying Controls, Cottons, Synthetics/Delicates, Wool Washing, Drying, Vibration, Optimizing dry time, wrinkles, draining Water,exterior, interior, winterizing, detergent, pump, technical specifica≠tions, Obtaining Service Registering
Installing/Removing Getting things ready to install your appliance Unpacking, Inspecting, Electricity, Closets/Alcoves, Plumbing, Venting Unpacking • Check the packing box for external damage. It is your responsibility to register any damage with the freight company delivering the product. • Remove the strapping, then slide the cardboard surround off the machine. Re≠move the foam protecting material and the plastic bag. • Write down the serial number from the box or the back of the machine.
Installing/Removing Getting things ready to install your appliance Unpacking, Inspecting, Electricity, Closets/Alcoves, Plumbing, Venting Unpacking • Check the packing box for external damage. It is your responsibility to register any damage with the freight company delivering the product. • Remove the strapping, then slide the cardboard surround off the machine. Re≠move the foam protecting material and the plastic bag. • Write down the serial number from the box or the back of the machine.
Installing/Removing Getting things ready to install your appliance (continued) Electricity Make sure that the voltage and frequency available correspond with the values stated on the data plate located at the back of the machine and that the electric system is dimensioned to withstand the maximum current shown on the data plate.
Installing/Removing Getting things ready to install your appliance (continued) CORRECT LEVELING OF UNIT IS ESSENTIAL It is important for the machine to be perfectly level. The angle of inclination on the work surface must not be more than 2 degrees. For this reason the machine is fitted with adjustable feet used for leveling the machine before use. In the case of carpeted flooring, remember to check that the ventilation in the support area is not plugged.
Drying Selecting Dry Cycles Drying Controls, Cottons, Synthetics/Delicates, Wool Drying Controls Washing and Drying AutomaticallyIf you are washing cottons (blue) or synthetics (Green), the machine will automatically begin drying at the end of the wash cycle. Remember that the temperature for cottons (blue) is higher than the temperature for synthetics (green). It takes 15 minutes for the machine to reach full temperature. Blue is for Cotton fabrics.
Stains Tips on Stain Removal BALLPOINT INK Hold stain against towel, spray closely from behind with aerosol hair spray. Ink should transfer to towel BEVERAGES Soak in cool water. Re-wash with stain remover. Launder using chlorine bleach (if safe for fabric) or oxygen bleach. BLOOD Immediately rinse with cool water. For dried stains, soak in warm water with a product containing enzymes. Launder.
Troubleshooting tips Read here, then call us Even though your washer dryer has been carefully designed and constructed, something may still go amiss with your machine. Before rushing to technician, please check that the operations listed below have been carried out. In many cases you will save time, money and a bother. Our statistics show that many calls made to our service representatives could have been solved with a little more attentions to these basic operations.
Owner Care Maintenance Tips Owner Care Exterior, interior, technical specifications Exterior Keeping the exterior of the unit clean will preserve the value of your investment. Use a soft cloth and liquid cleanser to clean and maintain the exterior. Interior Do not use solvents either to clean the machine or to do the wash.Clean the detergent dispenser ever so often. This is very simple and should be done with water.
/Preparing your appliance for service MAJESTIC™ has hundreds of service agents all over the country including a partnership with the Sears Network of Appliance Service, with over 15,000 service agents. Call us on our toll free hotline (1-800-678-8002) and we will serve your needs. Remember that if your service call is the result of component failure we will be happy to cover it under your warranty. If it is not, you will be charged for the time and travel.
Owner Care Warranty Information Your Majestic™ appliance is covered by this warranty under normal personal, family, household or RV use in the US and Canada Your Majestic™ Appliance is covered under the limited warranty for 1 full year from the original purchase, on the mechanical parts. Only when installed in accordance with the instructions in the manual does our warranty apply.
Owner Care Accessories You have a broad selection of installation and owner accessories available. Just ask your local deale or give us a call. PN 17-1051 Dryer Vent Kit includes: Louvered Vent Hood Pipe and Collar UL Lised Transition Duct (2) Clamps PN 17-1052 Econo Outside Vent Calcium filled Polypropylene Melting Point 325 Degrees Approx.