Installation Manual

14
Majestic • ECHEL36IN/STIN, ECHEL48IN/STIN, ECHEL60IN, ECHEL72IN Installation Manual • 2406-970 Rev. C • 1/17
B. Clearances to Combustibles
When selecting a location for the appliance it is important
to consider the required clearances to walls. See Figure
3.6 and Figure 3.7.
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be lo-
cated out of traffi c and away from furniture and draperies.
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation could vary due
to individual design preference.
Figure 3.6 Appliance Locations: ECHELON Single-Sided Models
Model A B C D E F G
ECHEL36IN
Inches 62-1/2 48-1/4 88-1/8
See
Section
10, Figure
10.16 and
10.17.
24-1/2 18-3/4 1
Millimeters 1588 1226 2238 622 476 25
ECHEL48IN
Inches 70-3/4 60-1/4 100-3/8 28-1/2 18-3/4 1
Millimeters 1797 1530 2550 724 476 25
ECHEL60IN
Inches 79-1/2 72-1/4 112-3/8 31-3/4 18-3/4 1
Millimeters 2019 1835 2854 807 476 25
ECHEL72IN
Inches 88 84-1/4 124-3/8 35-1/4 18-3/4 1
Millimeters 2235 2140 3159 895 476 25
It is important to follow the framing and fi nishing instruc-
tions step by step to ensure proper placement of fi replace
in the surrounding framing/fi nishing materials.
B
C
A
B
G
F
E
B
G
D
Refer to Section 10 for hearth, mantel and
wall projection information.
If a HEAT-ZONE® will be installed, refer to
Section 5.E for information.
2 HEAT-ZONES = Add 4 IN. to dimension B
1 HEAT-ZONE = Add 2 IN. to dimension B
B

