Installation Manual

56
Majestic • ECHEL36IN/STIN, ECHEL48IN/STIN, ECHEL60IN, ECHEL72IN Installation Manual • 2406-970 Rev. C • 1/17
WARNING! Risk of Fire! DO NOT apply combustible
materials beyond the minimum clearances. Comply with
all minimum clearances to combustibles as specifi ed in
this manual. Overlapping materials could ignite.
1. Follow instructions provided with decorative front for
installation.
0-1 Inch Thickness Overlap Fit Method
The non-combustible fi nishing material, 0-1 inch thick,
should be installed up to the fi replace opening on the top
bottom and sides.
Use the factory-installed top fi nishing guard to ensure the
fi nishing material does not extend into the fi replace open-
ing.
See Figure 10.9 for minimum fi nished opening dimen-
sions.
Figure 10.9 Non-Combustible Finish Material Diagram for 0-1 Inch Thick Overlap Fit Method (Picture Frame Front)
WARNING! Risk of Fire! DO NOT apply fi nishing mate-
rial beyond the top fi nishing guard and the bottom fi nish-
ing template. Appliance will overheat if fi nishing material
extends into appliance opening.
NOTICE: Decorative front will not fi t properly if fi nishing
material is applied beyond the fi nishing guard.
Picture Frame Front (PFF)
NOTICE: The fi nishing material thickness not only includes
the decorative fi nish materials (marble, tile, slate, etc) but
also the thin set, lath and adhesive used to attach the
decorative fi nish material.
Non-Combustible Finish Materials
Overlap Fit (0-1 Inch Thick Finishing Material Only)
Decorative Front Finishing Method Material Thickness Trim Ring
Picture Frame Front (PFF) Overlap Fit 0-1 inch Not included
Picture Frame Front (PFF) Inside Fit 0-4 Not included
FIREPLACE VIEWING AREA
15-3/4 IN.
51-1/8 IN. ECHEL48IN/ECHEL48STIN
39-1/8 IN. ECHEL36IN/ECHEL36STIN
63-1/8 IN. ECHEL60IN