Installation Manual

63
Majestic • ECHEL36IN/STIN, ECHEL48IN/STIN, ECHEL60IN, ECHEL72IN Installation Manual • 2406-970 Rev. C • 1/17
Figure 6. Media Installed
NO MEDIA ALLOWED
NO MEDIA ALLOWED
NO MEDIA IN GLASS RAIL
NO MEDIA IN GLASS RAIL
Figure 8. Install Bottom Glass Shield
TROUBLESHOOTING
After the initial start up burn, it may be necessary to
adjust the media placement to achieve the best fl ame
appearance. While fl ame height variation is normal, there
may appear to be higher peaks in some areas and low
fl ame peaks in other areas.
If the fl ame height appears to be excessively high in
some spots, applying more media to these areas on top
of the burner will help even out the fl ames. Spreading
the media as evenly as possible is the most effective way
to achieve optimal fl ame appearance and the most even
fl ame heights. One or more test burns may be required
to watch the fl ames mature and see how even they look
before making adjustments.
Figure 7.
ECHEL60IN AND
ECHEL60IN AND
ECHEL72IN MODELS ONLY
ECHEL72IN MODELS ONLY
DO NOT PLACE MEDIA IN THIS AREA
DO NOT PLACE MEDIA IN THIS AREA
9. ECHEL60IN and ECHEL72IN ONLY:
DO NOT place media in front of opening on right side
of the burner (60 and 72 only). Flame appearance will
be affected. See Figure 7.
10. Check between the pilot and burner and remove any
media that has fallen into this area.
11. Turn the appliance on to verify that the pilot and the
burner light properly.
12. Remove any glass media that may have fallen in the
bottom glass rail. Glass will not install properly if media
is present in glass rail. See Figure 6.
13. Reinstall glass assembly.
14. Install bottom glass shield between glass and glass
frame. See Figure 8.
15. Reinstall mesh front.