Installation Manual

Majestic • ECHEL36IN/STIN, ECHEL48IN/STIN, ECHEL60IN, ECHEL72IN Installation Manual • 2406-970 Rev. C • 1/17

D. Inspect Appliance and Components

• Carefully remove the appliance and components from

the packaging.

• The vent system components and decorative doors and

fronts may be shipped in separate packages.

• If packaged separately, the media, refractory, and/or

optional log kits must be installed.

• Report to your dealer any parts damaged in shipment,

particularly the condition of the glass.

• Read all of the instructions before starting the instal-

lation. Follow these instructions carefully during the

installation to ensure maximum safety and beneﬁ t.

WARNING! Risk of Fire or Explosion! Damaged parts

could impair safe operation. DO NOT install damaged, in-

complete or substitute components. Keep appliance dry.

C. Tools and Supplies Needed

Before beginning the installation be sure that the following

tools and building supplies are available.

Tape measure Framing material

Pliers Non-corrosive leak check solution

Hammer Phillips screwdriver

Gloves Framing square

Voltmeter Electric drill and bits (1/4 in. magnetic)

Plumb line Safety glasses

Level Reciprocating saw

Manometer Flat blade screwdriver

1/2 - 3/4 in. length, #6 or #8 Self-drilling screws

Caulking material (300ºF minimum continuous exposure

rating)

Hearth & Home Technologies disclaims any responsibility

for, and the warranty will be voided by, the following actions:

• Installation and use of any damaged appliance or vent

system component.

• Modiﬁ cation of the appliance or vent system.

• Installation other than as instructed by Hearth & Home

Technologies.

• Improper positioning of the gas logs or the glass door.

• Installation and/or use of any component part not approved

by Hearth & Home Technologies.

Any such action may cause a ﬁ re hazard.

WARNING! Risk of Fire, Explosion or Electric Shock!

DO NOT use this appliance if any part has been under

water. Call a qualiﬁ ed service technician to inspect the

appliance and to replace any part of the control system

and/or gas control which has been under water.